u-blox
Example using the UBLOX_C030_U201 board to communicate over a cellular link with Mbed Cloud.
Revision 2:a34e80e223c2, committed 2018-10-14
- Comitter:
- MarceloSalazar
- Date:
- Sun Oct 14 17:06:16 2018 +0100
- Parent:
- 1:eabbeaa37715
- Commit message:
- Add support for FW Update
Changed in this revision
Binary file bootloader/mbed-bootloader-C030_U201.bin has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/bootloader/mbed_app.json Sun Oct 14 17:06:16 2018 +0100
@@ -0,0 +1,65 @@
+{
+ "macros": [
+ "MBEDTLS_USER_CONFIG_FILE=\"bootloader_mbedtls_user_config.h\"",
+ "MAX_COPY_RETRIES=1",
+ "SHOW_PROGRESS_BAR=1",
+ "MAX_BOOT_RETRIES=3",
+ "ARM_UC_USE_PAL_CRYPTO=0",
+ "ARM_BOOTLOADER_USE_NVSTORE_ROT=1",
+ "ARM_UC_USE_PAL_BLOCKDEVICE=1",
+ "ARM_UC_PAAL_TRACE_ENABLE=0",
+ "MBED_CLOUD_CLIENT_UPDATE_STORAGE=ARM_UCP_FLASHIAP_BLOCKDEVICE",
+ "DEFAULT_MAX_APPLICATION_SIZE=(MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - MBED_CONF_APP_APPLICATION_START_ADDRESS)",
+ "DISABLE_ERROR_DESCRIPTION=1",
+ "Mutex=PlatformMutex"
+ ],
+ "config": {
+ "application-start-address": {
+ "help": "Address to the beginning of the active application firmware in flash",
+ "value": null
+ },
+ "application-jump-address": {
+ "help": "Jump address for running the active application firmware",
+ "value": null
+ },
+ "max-application-size": {
+ "help": "Maximum size of the active application",
+ "value": null
+ },
+ "flash-start-address": {
+ "help": "Start address of internal flash. Only used in this config to help the definition of other macros.",
+ "value": null
+ },
+ "flash-size": {
+ "help": "Total size of internal flash. Only used in this config to help the definition of other macros.",
+ "value": null
+ }
+ },
+ "target_overrides": {
+ "*": {
+ "target.features_remove": ["LWIP"],
+ "target.features_add" : ["COMMON_PAL"],
+ "platform.stdio-baud-rate" : 115200,
+ "platform.stdio-flush-at-exit": false,
+ "update-client.storage-address" : "(1024*1024*64)",
+ "update-client.storage-size" : "(1024*1024*2)",
+ "update-client.storage-locations": 1,
+ "update-client.firmware-header-version": "2"
+ },
+ "UBLOX_C030_U201": {
+ "flash-start-address" : "0x08000000",
+ "flash-size" : "(1024*1024)",
+ "nvstore.area_1_address" : "(0x080C0000)",
+ "nvstore.area_1_size" : "(128*1024)",
+ "nvstore.area_2_address" : "(0x080E0000)",
+ "nvstore.area_2_size" : "(128*1024)",
+ "update-client.application-details": "(MBED_CONF_APP_FLASH_START_ADDRESS+64*1024)",
+ "application-start-address" : "(MBED_CONF_APP_FLASH_START_ADDRESS+65*1024)",
+ "max-application-size" : "DEFAULT_MAX_APPLICATION_SIZE",
+ "sd.SPI_MOSI" : "D11",
+ "sd.SPI_MISO" : "D12",
+ "sd.SPI_CLK" : "D13",
+ "sd.SPI_CS" : "D10"
+ }
+ }
+}
--- a/main.cpp Sun Oct 14 12:07:03 2018 +0000
+++ b/main.cpp Sun Oct 14 17:06:16 2018 +0100
@@ -106,10 +106,10 @@
// Connect to the internet (DHCP is expected to be on)
printf("Connecting to the network using Cellular, please wait up to 180 seconds for a connection...\n");
-
+
// Connect to the internet (DHCP is expected to be on)
net = NetworkInterface::get_default_instance();
-
+
nsapi_error_t status = net->connect();
if (status != NSAPI_ERROR_OK) {
@@ -120,7 +120,7 @@
printf("activated your board [once] at http://www.jtiotsims.com/ubxC030).\n");
return -1;
}
-
+
printf("Connected to the network successfully. IP address: %s\n", net->get_ip_address());
// SimpleMbedCloudClient handles registering over LwM2M to Mbed Cloud
@@ -163,4 +163,4 @@
// You can easily run the eventQueue in a separate thread if required
eventQueue.dispatch_forever();
}
-#endif
\ No newline at end of file
+#endif
--- a/mbed_app.json Sun Oct 14 12:07:03 2018 +0000
+++ b/mbed_app.json Sun Oct 14 17:06:16 2018 +0100
@@ -12,17 +12,42 @@
],
"target_overrides": {
"*": {
- "platform.stdio-baud-rate": 115200,
- "platform.stdio-convert-newlines": true,
+ "target.features_add" : ["COMMON_PAL"],
+ "platform.stdio-baud-rate" : 115200,
+ "platform.stdio-flush-at-exit": false,
"update-client.storage-address" : "(1024*1024*64)",
"update-client.storage-size" : "(1024*1024*2)",
- "update-client.storage-locations": "1",
- "mbed-trace.enable": null
- },
+ "update-client.storage-locations": 1,
+ "update-client.firmware-header-version": "2"
+ },
"UBLOX_C030_U201": {
"target.network-default-interface-type" : "CELLULAR",
- "target.features_add" : ["STORAGE"],
+ "target.features_add" : ["STORAGE","BOOTLOADER"],
"target.components_add" : ["SD"],
+ "target.app_offset" : "0x10400",
+ "target.header_offset" : "0x10000",
+ "target.bootloader_img" : "bootloader/mbed-bootloader-C030_U201.bin",
+ "target.header_format": [
+ ["magic", "const", "32be", "0x5a51b3d4"],
+ ["version", "const", "32be", "2"],
+ ["firmwareVersion", "timestamp", "64be", null],
+ ["firmwareSize", "size", "64be", ["application"]],
+ ["firmwareHash", "digest", "SHA256", "application"],
+ ["hashpad", "const", "64be", "0"],
+ ["hashpad", "const", "64be", "0"],
+ ["hashpad", "const", "64be", "0"],
+ ["hashpad", "const", "64be", "0"],
+ ["campaign", "const", "64be", "0"],
+ ["campaign", "const", "64be", "0"],
+ ["firmwareSignatureSize", "const", "32be", "0"],
+ ["headerCRC", "digest", "CRCITT32be", "header"]],
+ "sotp-section-1-address" : "(0x080C0000)",
+ "sotp-section-1-size" : "(128*1024)",
+ "sotp-section-2-address" : "(0x080E0000)",
+ "sotp-section-2-size" : "(128*1024)",
+ "sotp-num-sections" : 2,
+ "update-client.bootloader-details" : "0x08007300",
+ "update-client.application-details" : "(0x08000000+64*1024)",
"target.features_add" : ["LWIP"],
"lwip.ipv4-enabled" : true,
"lwip.ethernet-enabled" : false,
--- a/simple-mbed-cloud-client.lib Sun Oct 14 12:07:03 2018 +0000 +++ b/simple-mbed-cloud-client.lib Sun Oct 14 17:06:16 2018 +0100 @@ -1,1 +1,1 @@ -https://github.com/armmbed/simple-mbed-cloud-client/#f904798403e0e7d848a04dd83a392dfad6a571ec +https://github.com/armmbed/simple-mbed-cloud-client/#8b023aa9e04bcd15ac01726c6f5b58b9422fafad
