u-blox
This example establishes a transparent link between the mbed USB CDC port and the modem (LISA) on the C027. You can use it to use the standard u-blox tools such as m-center or any terminal program. These tools can then connect to the serial port and talk directly to the modem. Baudrate should be set to 115200 baud and is fixed. m-center can be downloaded from u-blox website following this link: http://www.u-blox.com/en/evaluation-tools-a-software/u-center/m-center.html
Dependencies: C027 UbloxUSBModem mbed
Fork of
C027_ModemTransparentSerial
by 
u-blox
Install mbed Windows Drivers
Make sure you installed the drivers on your windows PC to get the virtual serial port. A installation guideline and the drivers can be found in the following wiki page. /handbook/Windows-serial-configuration
Revision 6:8d5bf8e37f18, committed 2013-12-06
- Comitter:
- mazgch
- Date:
- Fri Dec 06 09:54:21 2013 +0000
- Parent:
- 5:853bcd1ce32b
- Commit message:
- pulled in new library, LISA-C requires to use CDC1
Changed in this revision
| C027.lib | Show annotated file Show diff for this revision Revisions of this file |
| main.cpp | Show annotated file Show diff for this revision Revisions of this file |
--- a/C027.lib Wed Nov 06 10:48:49 2013 +0000 +++ b/C027.lib Fri Dec 06 09:54:21 2013 +0000 @@ -1,1 +1,1 @@ -http://mbed.org/teams/ublox/code/C027/#bc9e2eb5daa8 +http://mbed.org/teams/ublox/code/C027/#e30f90b5447e
--- a/main.cpp Wed Nov 06 10:48:49 2013 +0000
+++ b/main.cpp Fri Dec 06 09:54:21 2013 +0000
@@ -8,11 +8,12 @@
int main()
{
C027 c027;
+ c027.mdmUsbEnable(true);
c027.mdmPower(true);
// open the mdm serial port
WANDongle mdmDongle;
- USBSerialStream mdmStream(mdmDongle.getSerial(0/* the CDC usually 0 or 1*/ ));
+ USBSerialStream mdmStream(mdmDongle.getSerial(1/* the CDC usually 0 or 1, LISA-C requires CDC1*/));
USBHost* host = USBHost::getHostInst();
mdmDongle.addInitializer(new UbloxCDMAModemInitializer(host));
mdmDongle.addInitializer(new UbloxGSMModemInitializer(host));