WIZnet
TCP Echo example of W5500 Ethernet Kit for IoT, Test with Nucleo-F103RB
Dependencies: WIZnet_Library mbed
Dependents: F103RB_tcp_rtu_modbus_copy_v1_0
Fork of
W5500HelloWorld
by 
WIZnet
Revision 1:9a6af61c5eb4, committed 2015-05-17
- Comitter:
- kzl108
- Date:
- Sun May 17 11:12:56 2015 +0000
- Parent:
- 0:412f9c1172b7
- Commit message:
- Test with Nucleo-F103RB
Changed in this revision
| main.cpp | Show annotated file Show diff for this revision Revisions of this file |
| mbed.bld | Show annotated file Show diff for this revision Revisions of this file |
--- a/main.cpp Mon Apr 27 00:23:46 2015 +0000
+++ b/main.cpp Sun May 17 11:12:56 2015 +0000
@@ -14,8 +14,11 @@
Serial pc(USBTX, USBRX);
#ifdef TARGET_LPC11U68
-SPI spi(P0_9,P0_8,P1_29);
-WIZnetInterface ethernet(&spi,P0_2,P1_13);
+ SPI spi(P0_9,P0_8,P1_29);
+ WIZnetInterface ethernet(&spi,P0_2,P1_13);
+#elif defined(TARGET_NUCLEO_F103RB)
+ SPI spi(PA_7, PA_6, PA_5); // mosi, miso, sclk
+ WIZnetInterface ethernet(&spi, PB_6, PA_9);//scs(PB_6), nRESET(PA_9); // reset pin is dummy, don't affect any pin of WIZ550io
#endif
int main() {
@@ -24,8 +27,8 @@
//Set serial port baudrate speed: 115200
pc.baud(115200);
-
- pc.printf("Start\r\n");
+ wait(10);
+ pc.printf("W5500 Application Started \r\n");
char buffer[256];
@@ -37,6 +40,14 @@
int ret = ethernet.init(MAC_Addr,IP_Addr,IP_Subnet,IP_Gateway);
#endif
+
+ printf("SPI Initialized \r\n");
+ wait(1); // 1 second for stable state
+
+ printf("W5500 Networking Started \r\n");
+ wait(1); // 1 second for stable state
+
+
if (!ret) {
pc.printf("Initialized, MAC: %s\r\n", ethernet.getMACAddress());
ret = ethernet.connect();
--- a/mbed.bld Mon Apr 27 00:23:46 2015 +0000 +++ b/mbed.bld Sun May 17 11:12:56 2015 +0000 @@ -1,1 +1,1 @@ -http://mbed.org/users/mbed_official/code/mbed/builds/433970e64889 \ No newline at end of file +http://mbed.org/users/mbed_official/code/mbed/builds/8ab26030e058 \ No newline at end of file