CMSIS library (not dsp)
Revision 2:c991e443f67c, committed 2015-11-22
- Comitter:
- EricLew
- Date:
- Sun Nov 22 21:15:21 2015 +0000
- Parent:
- 1:bdae6f863744
- Commit message:
- 11/22/2015
Changed in this revision
inc/stm32l4xx.h | Show annotated file Show diff for this revision Revisions of this file |
src/startup_stm32l476xx.s | Show annotated file Show diff for this revision Revisions of this file |
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/inc/stm32l4xx.h Sun Nov 22 21:15:21 2015 +0000 @@ -0,0 +1,208 @@ +/** + ****************************************************************************** + * @file stm32l4xx.h + * @author MCD Application Team + * @version V1.0.1 + * @date 16-September-2015 + * @brief CMSIS STM32L4xx Device Peripheral Access Layer Header File. + * + * The file is the unique include file that the application programmer + * is using in the C source code, usually in main.c. This file contains: + * - Configuration section that allows to select: + * - The STM32L4xx device used in the target application + * - To use or not the peripheral�s drivers in application code(i.e. + * code will be based on direct access to peripheral�s registers + * rather than drivers API), this option is controlled by + * "#define USE_HAL_DRIVER" + * + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l4xx + * @{ + */ + +#ifndef __STM32L4xx_H +#define __STM32L4xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Library_configuration_section + * @{ + */ + +/** + * @brief STM32 Family + */ +#if !defined (STM32L4) +#define STM32L4 +#endif /* STM32L4 */ + +/* Uncomment the line below according to the target STM32L4 device used in your + application + */ + +#if !defined (STM32L471xx) && !defined (STM32L475xx) && !defined (STM32L476xx) && !defined (STM32L485xx) && !defined (STM32L486xx) + /* #define STM32L471xx */ /*!< STM32L471xx Devices */ + /* #define STM32L475xx */ /*!< STM32L475xx Devices */ + #define STM32L476xx !< STM32L476xx Devices + /* #define STM32L485xx */ /*!< STM32L485xx Devices */ + /* #define STM32L486xx */ /*!< STM32L486xx Devices */ +#endif + +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + */ +#if !defined (USE_HAL_DRIVER) +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_HAL_DRIVER */ +#endif /* USE_HAL_DRIVER */ + +/** + * @brief CMSIS Device version number V1.0.1 + */ +#define __STM32L4xx_CMSIS_DEVICE_VERSION_MAIN (0x01) /*!< [31:24] main version */ +#define __STM32L4xx_CMSIS_DEVICE_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */ +#define __STM32L4xx_CMSIS_DEVICE_VERSION_SUB2 (0x01) /*!< [15:8] sub2 version */ +#define __STM32L4xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32L4xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\ + |(__CMSIS_DEVICE_VERSION_SUB1 << 16)\ + |(__CMSIS_DEVICE_VERSION_SUB2 << 8 )\ + |(__CMSIS_DEVICE_VERSION_RC)) + +/** + * @} + */ + +/** @addtogroup Device_Included + * @{ + */ + +#if defined(STM32L471xx) + #include "stm32l471xx.h" +#elif defined(STM32L475xx) + #include "stm32l475xx.h" +#elif defined(STM32L476xx) + #include "stm32l476xx.h" +#elif defined(STM32L485xx) + #include "stm32l485xx.h" +#elif defined(STM32L486xx) + #include "stm32l486xx.h" +#else + #error "Please select first the target STM32L4xx device used in your application (in stm32l4xx.h file)" +#endif + +/** + * @} + */ + +/** @addtogroup Exported_types + * @{ + */ +typedef enum +{ + RESET = 0, + SET = !RESET +} FlagStatus, ITStatus; + +typedef enum +{ + DISABLE = 0, + ENABLE = !DISABLE +} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum +{ + ERROR = 0, + SUCCESS = !ERROR +} ErrorStatus; + +/** + * @} + */ + + +/** @addtogroup Exported_macros + * @{ + */ +#define SET_BIT(REG, BIT) ((REG) |= (BIT)) + +#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) + +#define READ_BIT(REG, BIT) ((REG) & (BIT)) + +#define CLEAR_REG(REG) ((REG) = (0x0)) + +#define WRITE_REG(REG, VAL) ((REG) = (VAL)) + +#define READ_REG(REG) ((REG)) + +#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) + +#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) + + +/** + * @} + */ + +#if defined (USE_HAL_DRIVER) + #include "stm32l4xx_hal.h" +#endif /* USE_HAL_DRIVER */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __STM32L4xx_H */ +/** + * @} + */ + +/** + * @} + */ + + + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +
--- a/src/startup_stm32l476xx.s Thu Nov 12 20:50:02 2015 +0000 +++ b/src/startup_stm32l476xx.s Sun Nov 22 21:15:21 2015 +0000 @@ -1,7 +1,7 @@ ;******************** (C) COPYRIGHT 2015 STMicroelectronics ******************** ;* File Name : startup_stm32l476xx.s ;* Author : MCD Application Team -;* Version : V1.0.1 +;* Version : V1.1.0 ;* Date : 16-September-2015 ;* Description : STM32L476xx Ultra Low Power devices vector table for MDK-ARM toolchain. ;* This module performs: @@ -48,8 +48,9 @@ Stack_Size EQU 0x400; AREA STACK, NOINIT, READWRITE, ALIGN=3 + EXPORT __initial_sp Stack_Mem SPACE Stack_Size -__initial_sp +__initial_sp ; <h> Heap Configuration @@ -59,6 +60,8 @@ Heap_Size EQU 0x200; AREA HEAP, NOINIT, READWRITE, ALIGN=3 + EXPORT __heap_base + EXPORT __heap_limit __heap_base Heap_Mem SPACE Heap_Size __heap_limit @@ -411,29 +414,30 @@ ;******************************************************************************* ; User Stack and Heap initialization ;******************************************************************************* - IF :DEF:TARGET_L476RG - EXPORT __initial_sp - EXPORT __heap_base - EXPORT __heap_limit - - ELSE - - IMPORT __use_two_region_memory - EXPORT __user_initial_stackheap - -__user_initial_stackheap - - LDR R0, = Heap_Mem - LDR R1, =(Stack_Mem + Stack_Size) - LDR R2, = (Heap_Mem + Heap_Size) - LDR R3, = Stack_Mem - BX LR - - ALIGN - - ENDIF - - END +; IF :DEF:TARGET_L476RG +; +; EXPORT __initial_sp +; EXPORT __heap_base +; EXPORT __heap_limit +; +; ELSE +; +; IMPORT __use_two_region_memory +; EXPORT __user_initial_stackheap +; +;__user_initial_stackheap +; +; LDR R0, = Heap_Mem +; LDR R1, =(Stack_Mem + Stack_Size) +; LDR R2, = (Heap_Mem + Heap_Size) +; LDR R3, = Stack_Mem +; BX LR +; +; ALIGN +; +; ENDIF +; + END ;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****