BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Revision 304:e92f264aa731, committed 2016-09-15
- Comitter:
- Vincent Coubard
- Date:
- Thu Sep 15 10:52:13 2016 +0100
- Branch:
- sync_with_github
- Parent:
- 303:fb52f2a212d2
- Child:
- 305:3d978a7bffc9
- Commit message:
- Sync with 12c4862c0af86b7f2bdaf545e8d2d0f56a974e32
2016-09-01 12:39:39+02:00: Andrea Palmieri
Update version of the BLE dependency
Signed-off-by: Andrea Palmieri <andrea.palmieri@st.com>
Changed in this revision
module.json | Show annotated file Show diff for this revision Revisions of this file |
--- a/module.json Thu Sep 15 10:52:12 2016 +0100 +++ b/module.json Thu Sep 15 10:52:13 2016 +0100 @@ -32,6 +32,6 @@ ], "dependencies": { "mbed-drivers": ">=0.11.3", - "ble": "^2.5.0" + "ble": "^2.7.0" } -} +} \ No newline at end of file