ST Americas mbed Team


Information on how to use the STM32 Nucleo board with mbed

STM32 Nucleo ATT Hackathon

AT&T Developer Summit Hackathon

ST is proud to be a part of Team mBed™ at the AT&T Developer Summit Hackathon. Join us at the event in Las Vegas by registering now for your free ticket! And if you are going to be a part of the Hackathon, read up on ST’s microcontrollers beforehand here to increase your chances at the $10k grand prize.

Detail information on how to get started with the STM32F411 Nucleo is listed below as well as information on hardware necessary to build a connected embedded device.

Please check back occasionally as ST will be updating the content of this page.


Tutorials

Overview : 5 Steps to Create Your Connected Embedded Device
Tutorial #1: Preparing the STM32F411 Nucleo Board for Development with ARM mbed
Tutorial #2: Getting Started with mbed and the STM32F411 Nucleo Board
Tutorial #3: "Hello World!" Creating Console Output
Tutorial #4a: Adding Connectivity: ACKme WiFi Module
Tutorial #4b: Adding Connectivity: U-Blox Cellular Module
Tutorial #4c: Adding Connectivity: Multitech mDot Radio
Tutorial #5: Getting Started with Seeed Studio Grove Sensors
Tutorial #6: Getting Started with Nucleo Sensors
Tutorial #7: Getting Started with AT&T M2X
Tutorial #8: Putting it all Together: From Device to Cloud
Tutorial #9: Getting Started with Nucleo NFC
Tutorial #10: Getting Started with Bluetooth Low Energy


How-to Videos:


ST Nucleo F411RE

The STM32 Nucleo board is a low-cost and easy-to-use development platform used to quickly evaluate and start a development with an STM32 microcontroller in LQFP64 package.


STM32F411 Microcontroller

The STM32F411xC/xE family is based on the high-performance ARM Cortex-M4 32-bit RISC core operating at a frequency of up to 100 MHz. Its Cortex-M4 core features a Floating point unit (FPU) single precision which supports all ARM single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.


ST-Link is the USB device interface that allows the STM32 Nucleo to be programmed by mbed.
It is recommended that you pre-install the ST-Link PC driver and update the ST-Link firmware before using your STM32 Nucleo with mbed.

ST-Link Nucleo Firmware
ST-Link PC Driver

ST-Link/V2 is a software utilities that allows you to connect to the STM32 microcontroller on the Nucleo board. It allows you to read and write the embedded flash contents of the STM32.
STM32 ST-Link Software Utility
STM32 ST-Link Software Documentation


Connectivity

ST has partnered with two mbed ready Connectivity module suppliers that are providing STM32 Nucleo compatible Cellular and WiFi "Shield" boards.

U-Blox Cellular Module
C027 mbed library and Sample Applications

AckMe WiFi Module
Wiconnect mBed library and Sample Applications
Wiconnect Library documentation

Multi-Tech mDot Radio Module
mDot mBed library and Sample Applications

ST Microelectronics BLE BlueNRG Radio Module
BlueNRG library and Sample Applications

ST Microelectroncs NFC/RFID tag Module
NFC library and Sample Applications


Sensors

ST Sensor Information
MEMS and enivonmental expansion board is compatible with the Arduino UNO R3 connector layout, and is designed around STMicroelectronics’ LSM6DS0 3-axis accelerometer + 3-axis gyroscope, the LIS3MDL 3-axis magnetometer, the HTS221 humidity sensor and the LPS25H pressure sensor.

Nucleo Sensors
MEMS and Environmental Sensors Shield

Grove Sensor Information from Seeed Studio
Use the Grove Shield board to connect to the STM32 Nucleo Arduino connector. This Arduino Shield board provides the base to connect multiple Grove sensor modules to the STM32 Nucleo board

Grove Arduino Shield Board
Grove Shield

Grove Sensors
Grove Temp / Humidity
Grove HCHO
Grove Barometer
Grove Digital Light
Grove Analog Light
Grove Air Quality
Grove Digital Compass
Grove Collision Sensor
Grove Gyro
Grove Accelerometer
Grove Water Sensor
Grove Alcohol Sensor
Grove Moisture Sensor
Grove Motion Sensor
Grove UV Sensor
Grove Heart Rate sensor
Grove Color Sensor
Grove GSR Sensor
Grove Camera
Range Finder
Mini Fan
Flame Sensor

Grove User Interface
Grove Button
Grove Vibration Motor
Grove LED Bar
Grove Relay
Grove Joystick
Grove 4-Digit Display
Grove Slider
Grove Touch Sensor (Multiple)
Grove Buzzer
Grove Touch Sensor (Single)
Grove Chainable LED

Grove Connector Cables
Grove 4 pin Conversion Cable (Female)
Grove 4 pin Conversion Cable (Male)


AT&T M2X

AT&T M2X is a fully managed data storage service for internet connected machine-to-machine devices that leverages the power and scale of AT&T's global network.


All wikipages