Nuvoton
/
NuMaker-mbed-GPIO_Interrupt
NuMaker GPIO Interrupt with Debounce Setting
Revision 4:a4b47a6be229, committed 2016-12-14
- Comitter:
- shliu1
- Date:
- Wed Dec 14 13:59:42 2016 +0800
- Parent:
- 3:2f8e3fcbdd7e
- Child:
- 5:b9b7cd06aaf0
- Commit message:
- Modify README.md and sync mbed-os library to mbed-os 5.2.3
Changed in this revision
README.md | Show annotated file Show diff for this revision Revisions of this file |
mbed-os.lib | Show annotated file Show diff for this revision Revisions of this file |
--- a/README.md Mon Nov 14 10:45:36 2016 +0800 +++ b/README.md Wed Dec 14 13:59:42 2016 +0800 @@ -1,3 +1,19 @@ +# Getting started with GPIO interrupt to flash LED on mbed OS + + +### Import NuMaker-mbed-GPIO_Interrupt from on-line IDE +1. Please choose Nuvoton NuMaker-PFM-XXX as your target platform. +2. Please press the left-up icon "New", then choose "NuMaker GPIO interrupt to flash led1" from the template list. +3. Your NuMaker-mbed-GPIO_Interrupt program is existed. + +#### Now compile +Please press compile icon. + +#### Burn Code & Execute +1. Connect the board NuMaker-PFM-XXX with your PC by USB cable, then there will be one "mbed" disk. +2. Copy the built binary file into "mbed" disk on you PC. +3. Press device's reset button to execute, press the SW1 button to flash LED. + # Example for GPIO IRQ This is an example for GPIO IRQ with de-bounce enabled.
--- a/mbed-os.lib Mon Nov 14 10:45:36 2016 +0800 +++ b/mbed-os.lib Wed Dec 14 13:59:42 2016 +0800 @@ -1,1 +1,1 @@ -https://github.com/ARMmbed/mbed-os/#a1c0840b3d69060e5eb708edb18358e424a40f51 +https://github.com/ARMmbed/mbed-os/#d5de476f74dd4de27012eb74ede078f6330dfc3f