Revision 0:a9d53048f0b6, committed 2019-03-25

Comitter:

screamer

Date:

Mon Mar 25 14:58:08 2019 +0000

Child:

1:42d51cf7cebe

Commit message:

Initial revision

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/.gitignore	Mon Mar 25 14:58:08 2019 +0000
@@ -0,0 +1,9 @@
+BUILD/
+*.pyc
+.DS_Store
+.env
+.cache/
+.pytest_cache/
+.update-certificates/
+.manifest_tool.json
+.mbed_cloud_config.json

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/.hgignore	Mon Mar 25 14:58:08 2019 +0000
@@ -0,0 +1,10 @@
+syntax: glob
+BUILD/
+*.pyc
+.DS_Store
+.env
+.cache/
+.pytest_cache/
+.update-certificates/
+.manifest_tool.json
+.mbed_cloud_config.json

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/LICENSE.txt	Mon Mar 25 14:58:08 2019 +0000
@@ -0,0 +1,165 @@
+Apache License
+Version 2.0, January 2004
+http://www.apache.org/licenses/
+
+TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+1. Definitions.
+
+"License" shall mean the terms and conditions for use, reproduction, and
+distribution as defined by Sections 1 through 9 of this document.
+
+"Licensor" shall mean the copyright owner or entity authorized by the copyright
+owner that is granting the License.
+
+"Legal Entity" shall mean the union of the acting entity and all other entities
+that control, are controlled by, or are under common control with that entity.
+For the purposes of this definition, "control" means (i) the power, direct or
+indirect, to cause the direction or management of such entity, whether by
+contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the
+outstanding shares, or (iii) beneficial ownership of such entity.
+
+"You" (or "Your") shall mean an individual or Legal Entity exercising
+permissions granted by this License.
+
+"Source" form shall mean the preferred form for making modifications, including
+but not limited to software source code, documentation source, and configuration
+files.
+
+"Object" form shall mean any form resulting from mechanical transformation or
+translation of a Source form, including but not limited to compiled object code,
+generated documentation, and conversions to other media types.
+
+"Work" shall mean the work of authorship, whether in Source or Object form, made
+available under the License, as indicated by a copyright notice that is included
+in or attached to the work (an example is provided in the Appendix below).
+
+"Derivative Works" shall mean any work, whether in Source or Object form, that
+is based on (or derived from) the Work and for which the editorial revisions,
+annotations, elaborations, or other modifications represent, as a whole, an
+original work of authorship. For the purposes of this License, Derivative Works
+shall not include works that remain separable from, or merely link (or bind by
+name) to the interfaces of, the Work and Derivative Works thereof.
+
+"Contribution" shall mean any work of authorship, including the original version
+of the Work and any modifications or additions to that Work or Derivative Works
+thereof, that is intentionally submitted to Licensor for inclusion in the Work
+by the copyright owner or by an individual or Legal Entity authorized to submit
+on behalf of the copyright owner. For the purposes of this definition,
+"submitted" means any form of electronic, verbal, or written communication sent
+to the Licensor or its representatives, including but not limited to
+communication on electronic mailing lists, source code control systems, and
+issue tracking systems that are managed by, or on behalf of, the Licensor for
+the purpose of discussing and improving the Work, but excluding communication
+that is conspicuously marked or otherwise designated in writing by the copyright
+owner as "Not a Contribution."
+
+"Contributor" shall mean Licensor and any individual or Legal Entity on behalf
+of whom a Contribution has been received by Licensor and subsequently
+incorporated within the Work.
+
+2. Grant of Copyright License.
+
+Subject to the terms and conditions of this License, each Contributor hereby
+grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free,
+irrevocable copyright license to reproduce, prepare Derivative Works of,
+publicly display, publicly perform, sublicense, and distribute the Work and such
+Derivative Works in Source or Object form.
+
+3. Grant of Patent License.
+
+Subject to the terms and conditions of this License, each Contributor hereby
+grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free,
+irrevocable (except as stated in this section) patent license to make, have
+made, use, offer to sell, sell, import, and otherwise transfer the Work, where
+such license applies only to those patent claims licensable by such Contributor
+that are necessarily infringed by their Contribution(s) alone or by combination
+of their Contribution(s) with the Work to which such Contribution(s) was
+submitted. If You institute patent litigation against any entity (including a
+cross-claim or counterclaim in a lawsuit) alleging that the Work or a
+Contribution incorporated within the Work constitutes direct or contributory
+patent infringement, then any patent licenses granted to You under this License
+for that Work shall terminate as of the date such litigation is filed.
+
+4. Redistribution.
+
+You may reproduce and distribute copies of the Work or Derivative Works thereof
+in any medium, with or without modifications, and in Source or Object form,
+provided that You meet the following conditions:
+
+You must give any other recipients of the Work or Derivative Works a copy of
+this License; and
+You must cause any modified files to carry prominent notices stating that You
+changed the files; and
+You must retain, in the Source form of any Derivative Works that You distribute,
+all copyright, patent, trademark, and attribution notices from the Source form
+of the Work, excluding those notices that do not pertain to any part of the
+Derivative Works; and
+If the Work includes a "NOTICE" text file as part of its distribution, then any
+Derivative Works that You distribute must include a readable copy of the
+attribution notices contained within such NOTICE file, excluding those notices
+that do not pertain to any part of the Derivative Works, in at least one of the
+following places: within a NOTICE text file distributed as part of the
+Derivative Works; within the Source form or documentation, if provided along
+with the Derivative Works; or, within a display generated by the Derivative
+Works, if and wherever such third-party notices normally appear. The contents of
+the NOTICE file are for informational purposes only and do not modify the
+License. You may add Your own attribution notices within Derivative Works that
+You distribute, alongside or as an addendum to the NOTICE text from the Work,
+provided that such additional attribution notices cannot be construed as
+modifying the License.
+You may add Your own copyright statement to Your modifications and may provide
+additional or different license terms and conditions for use, reproduction, or
+distribution of Your modifications, or for any such Derivative Works as a whole,
+provided Your use, reproduction, and distribution of the Work otherwise complies
+with the conditions stated in this License.
+
+5. Submission of Contributions.
+
+Unless You explicitly state otherwise, any Contribution intentionally submitted
+for inclusion in the Work by You to the Licensor shall be under the terms and
+conditions of this License, without any additional terms or conditions.
+Notwithstanding the above, nothing herein shall supersede or modify the terms of
+any separate license agreement you may have executed with Licensor regarding
+such Contributions.
+
+6. Trademarks.
+
+This License does not grant permission to use the trade names, trademarks,
+service marks, or product names of the Licensor, except as required for
+reasonable and customary use in describing the origin of the Work and
+reproducing the content of the NOTICE file.
+
+7. Disclaimer of Warranty.
+
+Unless required by applicable law or agreed to in writing, Licensor provides the
+Work (and each Contributor provides its Contributions) on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
+including, without limitation, any warranties or conditions of TITLE,
+NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are
+solely responsible for determining the appropriateness of using or
+redistributing the Work and assume any risks associated with Your exercise of
+permissions under this License.
+
+8. Limitation of Liability.
+
+In no event and under no legal theory, whether in tort (including negligence),
+contract, or otherwise, unless required by applicable law (such as deliberate
+and grossly negligent acts) or agreed to in writing, shall any Contributor be
+liable to You for damages, including any direct, indirect, special, incidental,
+or consequential damages of any character arising as a result of this License or
+out of the use or inability to use the Work (including but not limited to
+damages for loss of goodwill, work stoppage, computer failure or malfunction, or
+any and all other commercial damages or losses), even if such Contributor has
+been advised of the possibility of such damages.
+
+9. Accepting Warranty or Additional Liability.
+
+While redistributing the Work or Derivative Works thereof, You may choose to
+offer, and charge a fee for, acceptance of support, warranty, indemnity, or
+other liability obligations and/or rights consistent with this License. However,
+in accepting such obligations, You may act only on Your own behalf and on Your
+sole responsibility, not on behalf of any other Contributor, and only if You
+agree to indemnify, defend, and hold each Contributor harmless for any liability
+incurred by, or claims asserted against, such Contributor by reason of your
+accepting any such warranty or additional liability.

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/bootloader/LICENSE	Mon Mar 25 14:58:08 2019 +0000
@@ -0,0 +1,49 @@
+Permissive Binary License
+
+Version 1.0, September 2015
+
+Redistribution.  Redistribution and use in binary form, without
+modification, are permitted provided that the following conditions are
+met:
+
+1) Redistributions must reproduce the above copyright notice and the
+   following disclaimer in the documentation and/or other materials
+   provided with the distribution.
+
+2) Unless to the extent explicitly permitted by law, no reverse
+   engineering, decompilation, or disassembly of this software is
+   permitted.
+
+3) Redistribution as part of a software development kit must include the
+   accompanying file named "DEPENDENCIES" and any dependencies listed in
+   that file.
+
+4) Neither the name of the copyright holder nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission. 
+
+Limited patent license. The copyright holders (and contributors) grant a
+worldwide, non-exclusive, no-charge, royalty-free patent license to
+make, have made, use, offer to sell, sell, import, and otherwise
+transfer this software, where such license applies only to those patent
+claims licensable by the copyright holders (and contributors) that are
+necessarily infringed by this software. This patent license shall not
+apply to any combinations that include this software.  No hardware is
+licensed hereunder.
+
+If you institute patent litigation against any entity (including a
+cross-claim or counterclaim in a lawsuit) alleging that the software
+itself infringes your patent(s), then your rights granted under this
+license shall terminate as of the date such litigation is filed.
+
+DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+CONTRIBUTORS "AS IS." ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
+NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/bootloader/bootloader_app.json	Mon Mar 25 14:58:08 2019 +0000
@@ -0,0 +1,83 @@
+{
+    "macros": [
+        "MBEDTLS_USER_CONFIG_FILE=\"bootloader_mbedtls_user_config.h\"",
+        "SHOW_PROGRESS_BAR=0",
+        "MAX_COPY_RETRIES=1",
+        "MAX_BOOT_RETRIES=3",
+        "ARM_BOOTLOADER_USE_NVSTORE_ROT=1",
+        "ARM_UC_USE_PAL_CRYPTO=0",
+        "ARM_UC_USE_PAL_BLOCKDEVICE=1",
+        "ARM_UC_PAAL_TRACE_ENABLE=0",
+        "ARM_UC_PROFILE_MBED_CLOUD_CLIENT=1",
+        "ARM_UC_FEATURE_CRYPTO_PAL=0",
+        "ARM_UC_FEATURE_CRYPTO_MBEDTLS=1",
+        "MBED_CLOUD_CLIENT_UPDATE_STORAGE=ARM_UCP_FLASHIAP_BLOCKDEVICE",
+        "DEFAULT_MAX_APPLICATION_SIZE=(MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - MBED_CONF_APP_APPLICATION_START_ADDRESS - NVSTORE_AREA_1_SIZE - NVSTORE_AREA_2_SIZE)",
+        "DISABLE_ERROR_DESCRIPTION=1",
+        "Mutex=PlatformMutex"
+    ],
+    "config": {
+        "application-start-address": {
+            "help": "Address to the beginning of the active application firmware in flash",
+            "value": null
+        },
+        "application-jump-address": {
+            "help": "Jump address for running the active application firmware",
+            "value": null
+        },
+        "max-application-size": {
+            "help": "Maximum size of the active application",
+            "value": null
+        },
+        "flash-start-address": {
+            "help": "Start address of internal flash. Only used in this config to help the definition of other macros.",
+            "value": null
+        },
+        "flash-size": {
+            "help": "Total size of internal flash. Only used in this config to help the definition of other macros.",
+            "value": null
+        }
+    },
+    "target_overrides": {
+        "*": {
+            "target.features_remove"           : ["LWIP"],
+            "target.features_add"              : ["COMMON_PAL"],
+            "target.extra_labels_remove"       : ["PSA"],
+            "target.components_remove"         : ["FLASHIAP"],
+            "platform.stdio-baud-rate"         : 115200,
+            "platform.stdio-flush-at-exit"     : false
+        },
+        "K64F": {
+            "target.components_add"            : ["SD"],
+            "flash-start-address"              : "0x0",
+            "flash-size"                       : "(1024*1024)",
+            "nvstore.area_1_address"           : "(MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - 2*(4*1024))",
+            "nvstore.area_1_size"              : "(4*1024)",
+            "nvstore.area_2_address"           : "(MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - 1*(4*1024))",
+            "nvstore.area_2_size"              : "(4*1024)",
+            "update-client.storage-address"    : "(64*1024*1024)",
+            "update-client.storage-size"       : "(2*1024*1024)",
+            "update-client.storage-locations"  : 1,
+            "update-client.firmware-header-version": "2",
+            "update-client.application-details": "(MBED_CONF_APP_FLASH_START_ADDRESS + 64*1024)",
+            "application-start-address"        : "(MBED_CONF_APP_FLASH_START_ADDRESS + 65*1024)",
+            "max-application-size"             : "DEFAULT_MAX_APPLICATION_SIZE"
+        },
+        "K66F": {
+            "target.components_add"            : ["SD"],
+            "flash-start-address"              : "0x0",
+            "flash-size"                       : "(2048*1024)",
+            "nvstore.area_1_address"           : "(MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - 2*(4*1024))",
+            "nvstore.area_1_size"              : "(4*1024)",
+            "nvstore.area_2_address"           : "(MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - 1*(4*1024))",
+            "nvstore.area_2_size"              : "(4*1024)",
+            "update-client.storage-address"    : "(64*1024*1024)",
+            "update-client.storage-size"       : "(2*1024*1024)",
+            "update-client.storage-locations"  : 1,
+            "update-client.firmware-header-version": "2",
+            "update-client.application-details": "(MBED_CONF_APP_FLASH_START_ADDRESS + 64*1024)",
+            "application-start-address"        : "(MBED_CONF_APP_FLASH_START_ADDRESS + 65*1024)",
+            "max-application-size"             : "DEFAULT_MAX_APPLICATION_SIZE"
+        }
+    }
+}

Binary file bootloader/mbed-bootloader-K64F.bin has changed

Binary file bootloader/mbed-bootloader-K66F.bin has changed

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Mon Mar 25 14:58:08 2019 +0000
@@ -0,0 +1,183 @@
+// ----------------------------------------------------------------------------
+// Copyright 2016-2018 ARM Ltd.
+//
+// SPDX-License-Identifier: Apache-2.0
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// ----------------------------------------------------------------------------
+#ifndef MBED_TEST_MODE
+
+#include "mbed.h"
+#include "simple-mbed-cloud-client.h"
+#include "FATFileSystem.h"
+#include "LittleFileSystem.h"
+
+// Default network interface object. Don't forget to change the WiFi SSID/password in mbed_app.json if you're using WiFi.
+NetworkInterface *net = NetworkInterface::get_default_instance();
+
+// Default block device available on the target board
+BlockDevice *bd = BlockDevice::get_default_instance();
+
+#if COMPONENT_SD || COMPONENT_NUSD
+// Use FATFileSystem for SD card type blockdevices
+FATFileSystem fs("fs", bd);
+#else
+// Use LittleFileSystem for non-SD block devices to enable wear leveling and other functions
+LittleFileSystem fs("fs", bd);
+#endif
+
+#if USE_BUTTON == 1
+InterruptIn button(BUTTON1);
+#endif /* USE_BUTTON */
+
+// Default LED to use for PUT/POST example
+DigitalOut led(LED1);
+
+// Declaring pointers for access to Pelion Device Management Client resources outside of main()
+MbedCloudClientResource *button_res;
+MbedCloudClientResource *led_res;
+MbedCloudClientResource *post_res;
+
+// An event queue is a very useful structure to debounce information between contexts (e.g. ISR and normal threads)
+// This is great because things such as network operations are illegal in ISR, so updating a resource in a button's fall() function is not allowed
+EventQueue eventQueue;
+
+/**
+ * PUT handler - sets the value of the built-in LED
+ * @param resource The resource that triggered the callback
+ * @param newValue Updated value for the resource
+ */
+void put_callback(MbedCloudClientResource *resource, m2m::String newValue) {
+    printf("PUT received. New value: %s\n", newValue.c_str());
+    led = atoi(newValue.c_str());
+}
+
+/**
+ * POST handler - prints the content of the payload
+ * @param resource The resource that triggered the callback
+ * @param buffer If a body was passed to the POST function, this contains the data.
+ *               Note that the buffer is deallocated after leaving this function, so copy it if you need it longer.
+ * @param size Size of the body
+ */
+void post_callback(MbedCloudClientResource *resource, const uint8_t *buffer, uint16_t size) {
+    printf("POST received (length %u). Payload: ", size);
+    for (size_t ix = 0; ix < size; ix++) {
+        printf("%02x ", buffer[ix]);
+    }
+    printf("\n");
+}
+
+/**
+ * Button handler
+ * This function will be triggered either by a physical button press or by a ticker every 5 seconds (see below)
+ */
+void button_press() {
+    int v = button_res->get_value_int() + 1;
+    button_res->set_value(v);
+    printf("Button clicked %d times\n", v);
+}
+
+/**
+ * Notification callback handler
+ * @param resource The resource that triggered the callback
+ * @param status The delivery status of the notification
+ */
+void button_callback(MbedCloudClientResource *resource, const NoticationDeliveryStatus status) {
+    printf("Button notification, status %s (%d)\n", MbedCloudClientResource::delivery_status_to_string(status), status);
+}
+
+/**
+ * Registration callback handler
+ * @param endpoint Information about the registered endpoint such as the name (so you can find it back in portal)
+ */
+void registered(const ConnectorClientEndpointInfo *endpoint) {
+    printf("Registered to Pelion Device Management. Endpoint Name: %s\n", endpoint->internal_endpoint_name.c_str());
+}
+
+int main(void) {
+    printf("\nStarting Simple Pelion Device Management Client example\n");
+
+#if USE_BUTTON == 1
+    // If the User button is pressed ons start, then format storage.
+    if (button.read() == MBED_CONF_APP_BUTTON_PRESSED_STATE) {
+        printf("User button is pushed on start. Formatting the storage...\n");
+        int storage_status = StorageHelper::format(&fs, bd);
+        if (storage_status != 0) {
+            printf("ERROR: Failed to reformat the storage (%d).\n", storage_status);
+        }
+    } else {
+        printf("You can hold the user button during boot to format the storage and change the device identity.\n");
+    }
+#endif /* USE_BUTTON */
+
+    // Connect to the Internet (DHCP is expected to be on)
+    printf("Connecting to the network using the default network interface...\n");
+    net = NetworkInterface::get_default_instance();
+
+    nsapi_error_t net_status = NSAPI_ERROR_NO_CONNECTION;
+    while ((net_status = net->connect()) != NSAPI_ERROR_OK) {
+        printf("Unable to connect to network (%d). Retrying...\n", net_status);
+    }
+
+    printf("Connected to the network successfully. IP address: %s\n", net->get_ip_address());
+
+    printf("Initializing Pelion Device Management Client...\n");
+
+    // SimpleMbedCloudClient handles registering over LwM2M to Pelion Device Management
+    SimpleMbedCloudClient client(net, bd, &fs);
+    int client_status = client.init();
+    if (client_status != 0) {
+        printf("Pelion Client initialization failed (%d)\n", client_status);
+        return -1;
+    }
+
+    // Creating resources, which can be written or read from the cloud
+    button_res = client.create_resource("3200/0/5501", "button_count");
+    button_res->set_value(0);
+    button_res->methods(M2MMethod::GET);
+    button_res->observable(true);
+    button_res->attach_notification_callback(button_callback);
+
+    led_res = client.create_resource("3201/0/5853", "led_state");
+    led_res->set_value(led.read());
+    led_res->methods(M2MMethod::GET | M2MMethod::PUT);
+    led_res->attach_put_callback(put_callback);
+
+    post_res = client.create_resource("3300/0/5605", "execute_function");
+    post_res->methods(M2MMethod::POST);
+    post_res->attach_post_callback(post_callback);
+
+    printf("Initialized Pelion Device Management Client. Registering...\n");
+
+    // Callback that fires when registering is complete
+    client.on_registered(&registered);
+
+    // Register with Pelion DM
+    client.register_and_connect();
+
+#if USE_BUTTON == 1
+    // The button fires on an interrupt context, but debounces it to the eventqueue, so it's safe to do network operations
+    button.fall(eventQueue.event(&button_press));
+    printf("Press the user button to increment the LwM2M resource value...\n");
+#else
+    // The timer fires on an interrupt context, but debounces it to the eventqueue, so it's safe to do network operations
+    Ticker timer;
+    timer.attach(eventQueue.event(&button_press), 5.0);
+    printf("Simulating button press every 5 seconds...\n");
+#endif /* USE_BUTTON */
+
+    // You can easily run the eventQueue in a separate thread if required
+    eventQueue.dispatch_forever();
+}
+
+#endif /* MBED_TEST_MODE */

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os.lib	Mon Mar 25 14:58:08 2019 +0000
@@ -0,0 +1,1 @@
+https://github.com/ARMmbed/mbed-os/#51d55508e8400b60af467005646c4e2164738d48

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_app.json	Mon Mar 25 14:58:08 2019 +0000
@@ -0,0 +1,75 @@
+{
+    "target_overrides": {
+        "*": {
+            "target.components_remove"                  : ["FLASHIAP"],
+            "platform.stdio-baud-rate"                  : 115200,
+            "platform.stdio-convert-newlines"           : true,
+            "mbed-trace.enable"                         : null,
+            "nsapi.default-wifi-security"               : "WPA_WPA2",
+            "nsapi.default-wifi-ssid"                   : "\"SSID\"",
+            "nsapi.default-wifi-password"               : "\"Password\""
+        },
+        "K64F": {
+            "target.components_add"                     : ["SD"],
+            "device-management.flash-start-address"     : "0x0",
+            "device-management.flash-size"              : "(1024*1024)",
+            "device-management.sotp-section-1-address"  : "(MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - 2*(4*1024))",
+            "device-management.sotp-section-1-size"     : "(4*1024)",
+            "device-management.sotp-section-2-address"  : "(MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - 1*(4*1024))",
+            "device-management.sotp-section-2-size"     : "(4*1024)",
+            "update-client.application-details"         : "(MBED_CONF_APP_FLASH_START_ADDRESS + 64*1024)",
+            "update-client.storage-address"             : "(64*1024*1024)",
+            "update-client.storage-size"                : "(2*1024*1024)",
+            "update-client.storage-locations"           : "1",
+            "target.features_add"                       : ["BOOTLOADER"],
+            "target.bootloader_img"                     : "bootloader/mbed-bootloader-K64F.bin",
+            "target.header_offset"                      : "0x10000",
+            "target.app_offset"                         : "0x10400",
+            "button-pressed-state"                      : 0
+        },
+        "K66F": {
+            "target.components_add"                     : ["SD"],
+            "device-management.flash-start-address"     : "0x0",
+            "device-management.flash-size"              : "(2048*1024)",
+            "device-management.sotp-section-1-address"  : "(MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - 2*(4*1024))",
+            "device-management.sotp-section-1-size"     : "(4*1024)",
+            "device-management.sotp-section-2-address"  : "(MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - 1*(4*1024))",
+            "device-management.sotp-section-2-size"     : "(4*1024)",
+            "update-client.application-details"         : "(MBED_CONF_APP_FLASH_START_ADDRESS + 64*1024)",
+            "update-client.storage-address"             : "(64*1024*1024)",
+            "update-client.storage-size"                : "(2*1024*1024)",
+            "update-client.storage-locations"           : "1",
+            "target.features_add"                       : ["BOOTLOADER"],
+            "target.bootloader_img"                     : "bootloader/mbed-bootloader-K66F.bin",
+            "target.header_offset"                      : "0x10000",
+            "target.app_offset"                         : "0x10400",
+            "button-pressed-state"                      : 0
+        }
+    },
+    "config": {
+        "format-storage-layer-on-error": {
+            "help": "Whether to format the storage layer when it cannot be read - always disable for production devices!",
+            "value": 1
+        },
+        "main-stack-size": {
+            "value": 6000
+        },
+        "use-button": {
+            "help": "Whether the target has a button",
+            "macro_name": "USE_BUTTON",
+            "value": true
+        },
+        "button-pressed-state": {
+            "help": "Value of the button when pressed",
+            "value": 1
+        },
+        "no_led": {
+            "help": "This flag disables the heartbeat thread in tests. This is useful for platforms that don't have an LED or the LED is used for other functionality like LED on the SPI clockline etc",
+            "value": null
+        },
+        "tests-fs-size": {
+            "help": "Maximum size of the file system used for tests",
+            "value": null
+        }
+    }
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_cloud_dev_credentials.c	Mon Mar 25 14:58:08 2019 +0000
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2017 ARM Limited. All rights reserved.
+ * SPDX-License-Identifier: Apache-2.0
+ * Licensed under the Apache License, Version 2.0 (the License); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef __MBED_CLOUD_DEV_CREDENTIALS_H__
+#define __MBED_CLOUD_DEV_CREDENTIALS_H__
+ 
+#if MBED_CONF_DEVICE_MANAGEMENT_DEVELOPER_MODE == 1
+#error "Replace mbed_cloud_dev_credentials.c with your own developer cert."
+#endif
+ 
+#include <inttypes.h>
+ 
+const char MBED_CLOUD_DEV_BOOTSTRAP_ENDPOINT_NAME[] = "";
+const char MBED_CLOUD_DEV_ACCOUNT_ID[] = "";
+const char MBED_CLOUD_DEV_BOOTSTRAP_SERVER_URI[] = "";
+ 
+const uint8_t MBED_CLOUD_DEV_BOOTSTRAP_DEVICE_CERTIFICATE[] =
+{ 0x0 };
+ 
+const uint8_t MBED_CLOUD_DEV_BOOTSTRAP_SERVER_ROOT_CA_CERTIFICATE[] =
+{ 0x0 };
+ 
+const uint8_t MBED_CLOUD_DEV_BOOTSTRAP_DEVICE_PRIVATE_KEY[] =
+{ 0x0 };
+ 
+const char MBED_CLOUD_DEV_MANUFACTURER[] = "dev_manufacturer";
+ 
+const char MBED_CLOUD_DEV_MODEL_NUMBER[] = "dev_model_num";
+ 
+const char MBED_CLOUD_DEV_SERIAL_NUMBER[] = "0";
+ 
+const char MBED_CLOUD_DEV_DEVICE_TYPE[] = "dev_device_type";
+ 
+const char MBED_CLOUD_DEV_HARDWARE_VERSION[] = "dev_hardware_version";
+ 
+const uint32_t MBED_CLOUD_DEV_MEMORY_TOTAL_KB = 0;
+const uint32_t MBED_CLOUD_DEV_BOOTSTRAP_DEVICE_CERTIFICATE_SIZE = sizeof(MBED_CLOUD_DEV_BOOTSTRAP_DEVICE_CERTIFICATE);
+const uint32_t MBED_CLOUD_DEV_BOOTSTRAP_SERVER_ROOT_CA_CERTIFICATE_SIZE = sizeof(MBED_CLOUD_DEV_BOOTSTRAP_SERVER_ROOT_CA_CERTIFICATE);
+const uint32_t MBED_CLOUD_DEV_BOOTSTRAP_DEVICE_PRIVATE_KEY_SIZE = sizeof(MBED_CLOUD_DEV_BOOTSTRAP_DEVICE_PRIVATE_KEY);
+ 
+#endif //__MBED_CLOUD_DEV_CREDENTIALS_H__
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_settings.py	Mon Mar 25 14:58:08 2019 +0000
@@ -0,0 +1,45 @@
+"""
+mbed SDK
+Copyright (c) 2016 ARM Limited
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+"""
+
+from os.path import join, abspath, dirname
+
+#ROOT = abspath(join(dirname(__file__), "."))
+
+##############################################################################
+# Build System Settings
+##############################################################################
+#BUILD_DIR = abspath(join(ROOT, "build"))
+
+# ARM
+#ARM_PATH = "C:/Program Files/ARM"
+
+# GCC ARM
+#GCC_ARM_PATH = ""
+
+# IAR
+#IAR_PATH = "C:/Program Files (x86)/IAR Systems/Embedded Workbench 7.0/arm"
+
+# Goanna static analyser. Please overload it in private_settings.py
+#GOANNA_PATH = "c:/Program Files (x86)/RedLizards/Goanna Central 3.2.3/bin"
+
+#BUILD_OPTIONS = []
+
+# mbed.org username
+#MBED_ORG_USER = ""
+
+# Print compiler warnings and errors as link format
+#PRINT_COMPILER_OUTPUT_AS_LINK = False

Binary file mbed_settings.pyc has changed

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/simple-mbed-cloud-client.lib	Mon Mar 25 14:58:08 2019 +0000
@@ -0,0 +1,1 @@
+https://github.com/ARMmbed/simple-mbed-cloud-client/#2ad31604eb91b1facc11b2f9d1ba4e54a80d1384

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/update_default_resources.c	Mon Mar 25 14:58:08 2019 +0000
@@ -0,0 +1,41 @@
+// ----------------------------------------------------------------------------
+// Copyright 2016-2017 ARM Ltd.
+//
+// SPDX-License-Identifier: Apache-2.0
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// ----------------------------------------------------------------------------
+ 
+#ifdef MBED_CLOUD_CLIENT_USER_CONFIG_FILE
+#include MBED_CLOUD_CLIENT_USER_CONFIG_FILE
+#endif
+ 
+#include <stdint.h>
+ 
+#ifdef MBED_CLOUD_DEV_UPDATE_ID
+const uint8_t arm_uc_vendor_id[16] = { "dev_manufacturer" };
+const uint16_t arm_uc_vendor_id_size = sizeof(arm_uc_vendor_id);
+ 
+const uint8_t arm_uc_class_id[16]  = { "dev_model_number" };
+const uint16_t arm_uc_class_id_size = sizeof(arm_uc_class_id);
+#endif
+ 
+#ifdef MBED_CLOUD_DEV_UPDATE_CERT
+const uint8_t arm_uc_default_fingerprint[32] = { 0 };
+const uint16_t arm_uc_default_fingerprint_size =
+    sizeof(arm_uc_default_fingerprint);
+ 
+const uint8_t arm_uc_default_certificate[1] = { 0 };
+const uint16_t arm_uc_default_certificate_size =
+    sizeof(arm_uc_default_certificate);
+#endif
\ No newline at end of file