Revision 4:2e3db197b7e2, committed 2020-09-04

Comitter:

tlyp

Date:

Fri Sep 04 20:41:34 2020 +0000

Parent:

3:b0579a51fd46

Commit message:

Cleaned up header

Changed in this revision

--- a/main.cpp	Fri Sep 04 17:52:25 2020 +0000
+++ b/main.cpp	Fri Sep 04 20:41:34 2020 +0000
@@ -67,30 +67,30 @@
 #include "MAX30208.h"
 #include "ForwardErrCorr.h"
 
-MAX32630FTHR pegasus(MAX32630FTHR::VIO_3V3);
-
-I2C i2c(P3_4, P3_5);  //sda,scl
-
-RawSerial uart(P3_1,P3_0);//tx,rx
-MAX30208 TempSensor(i2c, 0x50); //Constructor takes 7-bit slave adrs
-
+/*User Defined Paramaters*/
 #define SymmetricKey "RfIsCoOl"   //Set Private Key here -- Make sure it is identical to receiver
-char  TransTable[] = {0x1F,0x18,0x06,0x01}; //Used to translate data for FEC -- Make sure it is identical to receiver
-Translator transTx(SymmetricKey, TransTable); //Initialize Encoder
-
-//RTC ALARM
 #define SendDelay   5   //Number of seconds between sending data
+#define TransmissionLength 1000 //How long to continuosuly send the message (ms)
 
 char DEVICETYPE = 'T';  //'T' for Temperature Sensor
 char DEVICEID = 0x01;   //Set the Device ID
 
-USBSerial microUSB;         //microUSB connection that can be used for printing
+/*End of User Defined Variables */
+
+
+MAX32630FTHR pegasus(MAX32630FTHR::VIO_3V3);
+I2C i2c(P3_4, P3_5);  //sda,scl
+RawSerial uart(P3_1,P3_0);//tx,rx
+MAX30208 TempSensor(i2c, 0x50); //Constructor takes 7-bit slave adrs
+
+char  TransTable[] = {0x1F,0x18,0x06,0x01}; //Used to translate data for FEC -- Make sure it is identical to receiver
+Translator transTx(SymmetricKey, TransTable); //Initialize Encoder
 
 DigitalOut rLED(LED1);
 DigitalOut gLED(LED2);
 DigitalOut bLED(LED3);
 
-DigitalIn sw1(SW1);             //Used on start-up to stay in active mode for re-programming
+DigitalIn sw2(SW1);             //Used on start-up to stay in active mode for re-programming
 DigitalOut TXEnable(P5_1);      //Used to Enable Transmitter
 
 // *****************************************************************************
@@ -117,12 +117,12 @@
 */
 uint16_t ReadData(MAX30208 TempSensor, uint16_t &value){
     if (TempSensor.takeDataMeasurment() != 0){
-        microUSB.printf("Error Taking data Meaurment\r\n");
+        printf("Error Taking data Meaurment\r\n");
         return(1);
     }
     wait_ms(50);    //max temp read is 50ms
     if (TempSensor.readData(value) !=0){
-        microUSB.printf("Error reading temperature Data\r\n");    
+        printf("Error reading temperature Data\r\n");    
         return(1);
     }
     return(0);
@@ -182,7 +182,7 @@
     while(1) {
         
         //hold down switch 1 to prevent the microcontroller from going into LP0
-        while(sw1 == 0);
+        while(sw2 == 0);
         
         uint16_t tempData;
         if(ReadData(TempSensor,tempData) !=0){
@@ -194,14 +194,14 @@
             transTx.Encrypt(tempData,EncryptedData); 
 
         TXEnable = 1;       //Turn on Transmitter
-        wait_us(450);       //Wake-up time for transmitter
+        wait_us(450);       //Minimum Wake-up time for transmitter per data sheet -- Do not lower
         
         //Start a timer for sending data
         Timer timer;
         timer.start();
         
         //Send the data for 1 sec
-        while(timer.read_ms() < 1000) {
+        while(timer.read_ms() < TransmissionLength) {
         
         //Send Data continuously
         comInit();