LELEC2811 - groupe X
base code for beer_project
Dependencies: mbed tsi_sensor FreescaleIAP MMA8451Q MPL3115A2
Revision 0:642dcee532b6, committed 2018-11-12
- Comitter:
- martlefebvre94
- Date:
- Mon Nov 12 22:13:57 2018 +0000
- Child:
- 1:3a57bceb88f8
- Commit message:
- Code for the 2018 project
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/FreescaleIAP.lib Mon Nov 12 22:13:57 2018 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/Sissors/code/FreescaleIAP/#186db0d96fcf
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/MMA8451Q.lib Mon Nov 12 22:13:57 2018 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/teams/LELEC2811-IS/code/MMA8451Q/#51c9ede6bb48
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/MPL3115A2.lib Mon Nov 12 22:13:57 2018 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/clemente/code/MPL3115A2/#82ac06669316
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Mon Nov 12 22:13:57 2018 +0000
@@ -0,0 +1,405 @@
+/*******************************************************/
+/**** LELEC_2811 Multiple sensors logger ***/
+/**** P. Gerard UCL 23/11/2016 ***/
+/**** M. Lefebvre UCL 09/11/2018 ***/
+/*******************************************************/
+
+#include "mbed.h"
+#include "FreescaleIAP.h" // Library for Flash access
+#include "MMA8451Q.h" // Accelerometer
+#include "MPL3115A2.h" // Library for altimeter/temperature access
+
+#define KL25Z_VDD 2.7 // !!! Value of supply voltage VDD: To be measured on board KL25Z pin 3V3 (calibration)
+
+#define MMA8451_I2C_ADDRESS (0x1d<<1)
+#define FSR 0x02 // 0x00 for 2G, 0x01 for 4G, 0x02 for 8G
+#define REG_OUT_X_MSB 0x01
+#define REG_OUT_Y_MSB 0x03
+#define REG_OUT_Z_MSB 0x05
+
+#define MPL3115A2_I2C_ADDRESS (0x60<<1)
+#define REG_ALTIMETER_MSB 0x01
+
+#define DISABLE_STATE 0
+#define ENABLE_STATE 1
+
+#define NO_JUMPER 0
+#define JUMPER_PRESENT 1
+
+#define LEVEL_0 0
+#define LEVEL_1 1
+
+#define LED_ON 0
+#define LED_OFF 1
+
+#define FLASH_NO_ACQ_DONE 0
+#define FLASH_ACQ_DONE 1
+#define ERASE_FLASH_ERROR -1
+#define WRITE_FLASH_ERROR -2
+
+#define SECTOR_SIZE 1024
+#define RESERVED_SECTOR 32
+
+#define ACQ_TIMER_PERIOD 0.010 // Time between 2 acquisitions in seconds
+
+// Structure of sensors Data !!!!! SIZE MUST BE A MULTIPLE OF 4 bytes !!!!!
+typedef struct{
+ int16_t Accel_X; // 2 bytes
+ int16_t Accel_Y; // 2 bytes
+ int16_t Accel_Z; // 2 bytes
+ float Temperature; // 4 bytes
+ unsigned short Analog_PTE20; // 2 bytes
+ unsigned short Analog_PTE21; // 2 bytes
+ unsigned short Analog_PTE22; // 2 bytes
+} Sensor_Data; // TOTAL = 16 bytes
+
+// --- Setup I2C for MMA8451 accelerometer
+// --- The last argument is the full scale range (FSR). 0x00 for 2G, 0x01 for 4G, 0x02 for 8G
+MMA8451Q my8451(PTE25, PTE24, MMA8451_I2C_ADDRESS, FSR);
+DigitalOut Accel_Enable(PTA13);
+
+// --- Set temperature sensor
+MPL3115A2 myMPL3115(PTE0, PTE1, MPL3115A2_I2C_ADDRESS);
+
+// --- Set serial port (for communication with PC)
+Serial Host_Comm(USBTX, USBRX);
+
+// Analog inputs (ADCs)
+AnalogIn myPTE20(PTE20);
+AnalogIn myPTE21(PTE21);
+AnalogIn myPTE22(PTE22);
+
+// Analog output (DAC)
+AnalogOut myDAC(PTE30);
+
+// Digital outputs
+DigitalOut Led_Red(LED1); // Define I/O for LEDs
+DigitalOut Led_Green(LED2);
+DigitalOut Led_Blue(LED3);
+DigitalOut Start_Pulse_Out(PTC9); // Used to enter/exit acquisition mode
+DigitalIn Start_Pulse_In(PTC11); // Short pins J1_15 and J1_16 to enter in Acq_Mode
+
+// Global variables
+volatile bool bTimer; // 1 means a timer tick is done
+Ticker myTick_Acq; // Periodical timer for acquisition
+
+int Flash_Base_Address = RESERVED_SECTOR * SECTOR_SIZE; // Store Flash base address with 32K reserved for application code
+int Nb_Sector;
+uint32_t KL25_Flash_Size;
+
+// Functions declaration
+void Clear_Led(void);
+int Acquisition_Flash(void);
+int Read_Data_Logging(void);
+bool Check_Jumper(void);
+void myTimer_Acq_Task(void);
+void Acquisition_Task(void);
+void Read_Task(void);
+extern IAPCode verify_erased(int address, unsigned int length);
+
+int main() {
+
+ uint8_t Count; // Count defining the number of time the LED blinks before data acquisition
+
+ // Set DAC output voltage
+ float vdac;
+ uint16_t dac_value; // Local variable in 16 bits
+
+ vdac = 0.3; // Voltage output value
+ dac_value = (uint16_t) ((vdac * 65536) / KL25Z_VDD); // Transform desired voltage to fraction of 0xFFFF
+ myDAC.write_u16(dac_value); // DAC value in range 0x0000 - 0xFFFF (see mbed's AnalogOut classe ref.)
+
+ Start_Pulse_In.mode(PullNone); // Input pin is programmed as floating
+ Accel_Enable = DISABLE_STATE; // Turn Accel. Enable I/O to disabled state
+
+// --- Baud rate setting
+ Host_Comm.baud(115200);
+ Clear_Led();
+
+ KL25_Flash_Size = flash_size(); // Get size of KL25 embedded Flash
+ Nb_Sector = (KL25_Flash_Size / SECTOR_SIZE) - RESERVED_SECTOR; // Reserve max 32K for app code
+ myTick_Acq.attach(&myTimer_Acq_Task, ACQ_TIMER_PERIOD); // Initialize timer interrupt
+
+ Host_Comm.printf("\n\rLELEC2811 Multiple sensors logger V2.0 UCL 2018\n\r");
+
+ if ((sizeof(Sensor_Data) % 4) != 0)
+ {
+ Host_Comm.printf("\n\rERROR! Acquisition Data Structure size is NOT a multiple of 4!!! (%d)", sizeof(Sensor_Data));
+ for(;;);
+ }
+
+ myMPL3115.Oversample_Ratio(OVERSAMPLE_RATIO_4);
+ myMPL3115.Barometric_Mode(); // Configure MPL3115 (used for temperature and pressure measurement)
+
+ for (;;)
+ {
+ if (Check_Jumper() == JUMPER_PRESENT)
+ {
+ Clear_Led();
+
+ Count = 5;
+ while (Count !=0)
+ {
+ if (Check_Jumper() == JUMPER_PRESENT)
+ {
+ Led_Blue = LED_ON; // Blink to alert user "Enter in Acquisition" after 5 seconds
+ wait_ms(900);
+ Led_Blue = LED_OFF;
+ wait_ms(100);
+ Count --;
+ if (Count == 0)
+ {
+ Acquisition_Task();
+ }
+ }
+ else
+ {
+ Count = 0;
+ }
+ }
+ }
+ else
+ {
+ Read_Task();
+ }
+ }
+}
+
+void Read_Task()
+{
+ char host_cmd;
+ IAPCode Flash_State;
+ bool bAcq_Done;
+
+ Flash_State = verify_erased(Flash_Base_Address, KL25_Flash_Size - (RESERVED_SECTOR * SECTOR_SIZE));
+ if (Flash_State == 0) // Virgin Flash ?
+ {
+ bAcq_Done = 0;
+ }
+ else
+ {
+ bAcq_Done = 1;
+ }
+
+ Clear_Led();
+ wait_ms(500);
+
+ if (bAcq_Done == 1)
+ {
+ Led_Green = LED_ON;
+ Host_Comm.putc('1');
+ }
+ else
+ {
+ Led_Red = LED_ON;
+ Host_Comm.putc('0');
+ }
+
+ if(Host_Comm.readable()) // Did we receive a char from Host ?
+ {
+ host_cmd = Host_Comm.getc(); // Get it
+
+ if ((host_cmd == 'R') || (host_cmd == 'r')) // Read Flash Command ?
+ {
+ Read_Data_Logging(); // Read and send acquisition data
+ }
+ }
+ wait_ms(50);
+}
+
+void Acquisition_Task()
+{
+ int Acq_Status;
+
+ Clear_Led();
+
+ Acq_Status = Acquisition_Flash();
+
+ Clear_Led();
+
+ while (Check_Jumper() == JUMPER_PRESENT)
+ {
+ if (Acq_Status != FLASH_ACQ_DONE)
+ {
+ Led_Red = !Led_Red;
+ }
+ else
+ {
+ Led_Green = !Led_Green;
+ }
+ wait_ms(100);
+ }
+}
+
+void Clear_Led(void)
+{
+ Led_Red = LED_OFF;
+ Led_Green = LED_OFF;
+ Led_Blue = LED_OFF; // Bug on board : Turning on the blue LED decreases consumption...
+}
+
+bool Check_Jumper() // If J1_15 and J1_16 connected together -> return JUMPER_PRESENT
+{
+ uint8_t i;
+
+ for (i = 0 ; i < 2 ; i ++)
+ {
+ Start_Pulse_Out = LEVEL_1;
+ wait_ms(1);
+ if (Start_Pulse_In != LEVEL_1)
+ {
+ return NO_JUMPER;
+ }
+
+ Start_Pulse_Out = LEVEL_0;
+ wait_ms(1);
+ if (Start_Pulse_In != LEVEL_0)
+ {
+ return NO_JUMPER;
+ }
+ }
+ return JUMPER_PRESENT;
+}
+
+int Acquisition_Flash(void)
+{
+ int Status;
+ int Flash_Ptr ;
+ int Led_Counter;
+ Sensor_Data myData;
+
+/*** Erase all Flash Page **/
+ for (Flash_Ptr = Flash_Base_Address ; Flash_Ptr < KL25_Flash_Size ; Flash_Ptr += 0x400)
+ {
+ Status = erase_sector(Flash_Ptr); // Erase sector
+
+ if (Status !=0)
+ {
+ return ERASE_FLASH_ERROR;
+ }
+ }
+
+ Flash_Ptr = Flash_Base_Address; // Begin of Storage Area in Flash
+
+ Led_Blue = LED_ON;
+ Led_Counter = 0;
+
+/***** Begin of Loop Acquisition - Write in Flash ***/
+
+ while (Flash_Ptr < (KL25_Flash_Size - sizeof(Sensor_Data)) ) // Acq Loop
+ {
+ while (bTimer == 0) // Wait Acq Tick Timer Done
+ {
+
+ }
+ bTimer = 0;
+
+ if ((float) Led_Counter * ACQ_TIMER_PERIOD == 1.0) // Blink at 1Hz
+ {
+ Led_Counter = 0;
+ Led_Blue = !Led_Blue;
+ }
+
+ Led_Counter++;
+
+ // Get accelerometer data
+ Accel_Enable = ENABLE_STATE; // Rising edge -> Start accelerometer measurement
+
+ myData.Accel_X = my8451.getAccAxis(REG_OUT_X_MSB);
+ myData.Accel_Y = my8451.getAccAxis(REG_OUT_Y_MSB);
+ myData.Accel_Z = my8451.getAccAxis(REG_OUT_Z_MSB);
+
+ Accel_Enable = DISABLE_STATE;
+
+ // Get temperature value
+ myData.Temperature = myMPL3115.getTemperature();
+
+ // Get ADC values
+ myData.Analog_PTE20 = myPTE20.read_u16();
+ myData.Analog_PTE21 = myPTE21.read_u16();
+ myData.Analog_PTE22 = myPTE22.read_u16();
+
+ /*** Save Data in Flash ***/
+ Status = program_flash(Flash_Ptr, (char *) &myData, sizeof(Sensor_Data)); // Write in the Flash
+ if (Status != 0)
+ {
+ Host_Comm.printf("\n\rFlash_Write Error = %d", Status);
+ return WRITE_FLASH_ERROR;
+ }
+ Flash_Ptr += sizeof(Sensor_Data);
+
+ if (Check_Jumper() != JUMPER_PRESENT) // If jumper removed -> Stop acquisition
+ {
+ return FLASH_ACQ_DONE ;
+ }
+ }
+
+ return FLASH_ACQ_DONE ;
+}
+
+int Read_Data_Logging()
+{
+ Sensor_Data * data = (Sensor_Data * )Flash_Base_Address; // Sensor_Data pointer of data stored in Flash
+ int Flash_Record_Ptr;
+ char cmd;
+ int Record_Counter;
+ int Max_Record;
+ Sensor_Data myRead_Data; // Data Structure used to retrieve saved value from Flash
+
+ float Voltage_PTE20;
+ float Voltage_PTE21;
+ float Voltage_PTE22;
+
+ Clear_Led();
+
+ Max_Record = (Nb_Sector * SECTOR_SIZE) / sizeof(Sensor_Data);
+ Record_Counter = 0;
+ Flash_Record_Ptr = 0;
+
+ Host_Comm.printf("\n\rAccX AccY AccZ Temp PTE20 PTE21 PTE22");
+
+ while (Record_Counter < Max_Record)
+ {
+ Led_Green = !Led_Green;
+ Led_Blue = !Led_Green;
+
+ if(Host_Comm.readable())
+ {
+ cmd = Host_Comm.getc();
+ if ((cmd == 'S') || (cmd == 's')) // Receiving 'S' or 's' means stop Read Flash
+ {
+ Clear_Led();
+ return 0;
+ }
+ }
+
+ myRead_Data = data[Flash_Record_Ptr];
+
+ Flash_Record_Ptr ++;
+
+ if ((myRead_Data.Accel_X == -1) && (myRead_Data.Accel_Y == -1) && (myRead_Data.Accel_Z == -1)) // Valid data ? (!= 0xFFFFFFFF from empty Flash sector)
+ {
+ }
+ else
+ {
+ Voltage_PTE20 = ((float) myRead_Data.Analog_PTE20 / 0XFFFF) * KL25Z_VDD; // Convert to voltage
+ Voltage_PTE21 = ((float) myRead_Data.Analog_PTE21 / 0XFFFF) * KL25Z_VDD;
+ Voltage_PTE22 = ((float) myRead_Data.Analog_PTE22 / 0XFFFF) * KL25Z_VDD;
+
+ Host_Comm.printf("\n\r%d ", Record_Counter);
+ Host_Comm.printf("%d %d %d ", myRead_Data.Accel_X, myRead_Data.Accel_Y, myRead_Data.Accel_Z);
+ Host_Comm.printf("%1.2f ", myRead_Data.Temperature);
+ Host_Comm.printf("%1.3f %1.3f %1.3f ", Voltage_PTE20, Voltage_PTE21, Voltage_PTE22);
+ }
+
+ Record_Counter ++;
+ }
+ Clear_Led();
+ return 0;
+}
+
+/* Interrupt Task */
+void myTimer_Acq_Task()
+{
+ bTimer = 1;
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Mon Nov 12 22:13:57 2018 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/0ab6a29f35bf \ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/tsi_sensor.lib Mon Nov 12 22:13:57 2018 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/Kojto/code/tsi_sensor/#20ffa9b18488