Future Electronics
Fork of the official LoRaWAN example adapted for Future Electronic's Sequana board with SX1272MB2DAS LoRa shield.
Revision 58:d86aa57863ed, committed 2019-09-11
- Comitter:
- lru
- Date:
- Wed Sep 11 16:08:09 2019 +0000
- Parent:
- 57:36e87c44c920
- Commit message:
- Initial demo version for Sequana board.
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/bd2808-driver.lib Wed Sep 11 16:08:09 2019 +0000 @@ -0,0 +1,1 @@ +https://github.com/lrusinowicz/bd2808-driver/#62bfd96f856504d53e714b69f701136a75622371
--- a/main.cpp Tue Sep 03 14:01:54 2019 +0100
+++ b/main.cpp Wed Sep 11 16:08:09 2019 +0000
@@ -19,13 +19,19 @@
#include "lorawan/LoRaWANInterface.h"
#include "lorawan/system/lorawan_data_structures.h"
#include "events/EventQueue.h"
+#include "psoc6_utils.h"
+#include "mbed.h"
// Application helpers
#include "DummySensor.h"
#include "trace_helper.h"
#include "lora_radio_helper.h"
+#include "BD2808.h"
+
using namespace events;
+using namespace mbed;
+
// Max payload size can be LORAMAC_PHY_MAXPAYLOAD.
// This example only communicates with much shorter messages (<30 bytes).
@@ -87,17 +93,47 @@
*/
static lorawan_app_callbacks_t callbacks;
+
+Timer g_timer;
+DigitalOut led(LED1);
+BD2808 leds;
+
+static uint32_t uid = 20;
+
+bool frame_send = false;
+
/**
* Entry point for application
*/
int main(void)
{
+ static uint8_t mac_address[6];
+ static uint8_t device_eui[8] = {0x00, 0x00, 0x00, 0xff, 0xfe, 0x00, 0x00, 0x00};
+ static const uint8_t application_eui[] = MBED_CONF_LORA_APPLICATION_EUI;
+ static const uint8_t application_key[] = MBED_CONF_LORA_APPLICATION_KEY;
+ static lorawan_connect_t connect_params = {
+ .connect_type = LORAWAN_CONNECTION_OTAA,
+ };
+
// setup tracing
setup_trace();
// stores the status of a call to LoRaWAN protocol
lorawan_status_t retcode;
+ // Create unique, hardware-dependent EUI.
+ cy_get_bd_mac_address(mac_address);
+ // MAC address is in reverse sequence.
+ for (int i = 0; i < 3; ++i) {
+ device_eui[i] = mac_address[5 - i];
+ device_eui[i + 5] = mac_address[2 - i];
+ }
+ printf("\r\nDevice EUI is %02X", device_eui[0]);
+ for (int i = 1; i < 8; ++i) {
+ printf(":%02X", device_eui[i]);
+ }
+ printf("\r\n");
+
// Initialize LoRaWAN stack
if (lorawan.initialize(&ev_queue) != LORAWAN_STATUS_OK) {
printf("\r\n LoRa initialization failed! \r\n");
@@ -128,7 +164,22 @@
printf("\r\n Adaptive data rate (ADR) - Enabled \r\n");
- retcode = lorawan.connect();
+ // Specify class C
+ if (lorawan.set_device_class(CLASS_C) != LORAWAN_STATUS_OK) {
+ printf("\r\n setting class C failed! \r\n");
+ return -1;
+ }
+
+ printf("\r\n Class C - Enabled \r\n");
+
+ connect_params.connection_u.otaa.dev_eui = device_eui;
+ connect_params.connection_u.otaa.app_eui = const_cast<uint8_t *>(application_eui);
+ connect_params.connection_u.otaa.app_key = const_cast<uint8_t *>(application_key);
+ connect_params.connection_u.otaa.nb_trials = MBED_CONF_LORA_NB_TRIALS;
+
+ g_timer.start();
+
+ retcode = lorawan.connect(connect_params);
if (retcode == LORAWAN_STATUS_OK ||
retcode == LORAWAN_STATUS_CONNECT_IN_PROGRESS) {
@@ -148,12 +199,14 @@
/**
* Sends a message to the Network Server
*/
-static void send_message()
+static void send_message(int entry)
{
uint16_t packet_len;
int16_t retcode;
int32_t sensor_value;
+ printf("\r\n[%8u] Sending message (%d) \r\n", g_timer.read_ms(), entry);
+
if (ds1820.begin()) {
ds1820.startConversion();
sensor_value = ds1820.read();
@@ -167,6 +220,7 @@
packet_len = sprintf((char *) tx_buffer, "Dummy Sensor Value is %d",
sensor_value);
+ led = 1;
retcode = lorawan.send(MBED_CONF_LORA_APP_PORT, tx_buffer, packet_len,
MSG_UNCONFIRMED_FLAG);
@@ -175,15 +229,18 @@
: printf("\r\n send() - Error code %d \r\n", retcode);
if (retcode == LORAWAN_STATUS_WOULD_BLOCK) {
+ lorawan.cancel_sending();
+ led = 0;
//retry in 3 seconds
if (MBED_CONF_LORA_DUTY_CYCLE_ON) {
- ev_queue.call_in(3000, send_message);
+ ev_queue.call_in(3000, send_message, 3);
}
}
return;
}
- printf("\r\n %d bytes scheduled for transmission \r\n", retcode);
+ frame_send = true;
+ printf("\r\n[%8u] %d bytes scheduled for transmission \r\n", g_timer.read_ms(), retcode);
memset(tx_buffer, 0, sizeof(tx_buffer));
}
@@ -201,12 +258,24 @@
return;
}
- printf(" RX Data on port %u (%d bytes): ", port, retcode);
+ printf("[%8u] RX Data on port %u (%d bytes): ", g_timer.read_ms(), port, retcode);
for (uint8_t i = 0; i < retcode; i++) {
printf("%02x ", rx_buffer[i]);
}
printf("\r\n");
-
+
+ if (rx_buffer[0] != 0) {
+ for (int i = 0; i < 8; ++i) {
+ leds.set_color(i, BGR24_color_t(200,200,200));
+ }
+ leds.refresh();
+ } else {
+ for (int i = 0; i < 8; ++i) {
+ leds.set_color(i, BGR24_color_t(0,0,0));
+ }
+ leds.refresh();
+ }
+
memset(rx_buffer, 0, sizeof(rx_buffer));
}
@@ -217,49 +286,62 @@
{
switch (event) {
case CONNECTED:
- printf("\r\n Connection - Successful \r\n");
+ printf("\r\n[%8u] Connection - Successful \r\n", g_timer.read_ms());
if (MBED_CONF_LORA_DUTY_CYCLE_ON) {
- send_message();
+ send_message(0);
} else {
- ev_queue.call_every(TX_TIMER, send_message);
+ printf("\r\n Scheduling new transmission every %u ms\r\n", TX_TIMER);
+ ev_queue.call_every(TX_TIMER, send_message, 1);
}
break;
case DISCONNECTED:
+ led = 0;
+ frame_send = false;
ev_queue.break_dispatch();
- printf("\r\n Disconnected Successfully \r\n");
+ printf("\r\n[%8u] Disconnected Successfully \r\n", g_timer.read_ms());
break;
case TX_DONE:
- printf("\r\n Message Sent to Network Server \r\n");
- if (MBED_CONF_LORA_DUTY_CYCLE_ON) {
- send_message();
+ led = 0;
+ if (frame_send) {
+ frame_send = false;
+ printf("\r\n[%8u] Message Sent to Network Server \r\n", g_timer.read_ms());
+ if (MBED_CONF_LORA_DUTY_CYCLE_ON) {
+ printf(" Scheduling message %u\r\n", uid);
+ //send_message();
+ ev_queue.call_in(10000, send_message, uid++);
+ }
+ } else {
+ printf("\r\n[%8u] Duplicate TX_DONE !!! \r\n", g_timer.read_ms());
}
break;
case TX_TIMEOUT:
case TX_ERROR:
case TX_CRYPTO_ERROR:
case TX_SCHEDULING_ERROR:
- printf("\r\n Transmission Error - EventCode = %d \r\n", event);
+ led = 0;
+ frame_send = false;
+ printf("\r\n[%8u] Transmission Error - EventCode = %d \r\n", g_timer.read_ms(), event);
// try again
if (MBED_CONF_LORA_DUTY_CYCLE_ON) {
- send_message();
+ send_message(2);
}
break;
case RX_DONE:
- printf("\r\n Received message from Network Server \r\n");
+ printf("\r\n[%8u] Received message from Network Server \r\n", g_timer.read_ms());
receive_message();
break;
case RX_TIMEOUT:
case RX_ERROR:
- printf("\r\n Error in reception - Code = %d \r\n", event);
+ printf("\r\n[%8u] Error in reception - Code = %d \r\n", g_timer.read_ms(), event);
break;
case JOIN_FAILURE:
printf("\r\n OTAA Failed - Check Keys \r\n");
break;
case UPLINK_REQUIRED:
- printf("\r\n Uplink required by NS \r\n");
+ printf("\r\n[%8u] Uplink required by NS \r\n", g_timer.read_ms());
if (MBED_CONF_LORA_DUTY_CYCLE_ON) {
- send_message();
+ send_message(4);
}
break;
default:
--- a/mbed-lora-radio-drv.lib Tue Sep 03 14:01:54 2019 +0100 +++ b/mbed-lora-radio-drv.lib Wed Sep 11 16:08:09 2019 +0000 @@ -1,1 +1,1 @@ -https://github.com/ARMmbed/mbed-semtech-lora-rf-drivers#6012fa43cf9f2cae46fa9d424fe4051d00e157a2 +https://github.com/ARMmbed/mbed-semtech-lora-rf-drivers/#6012fa43cf9f2cae46fa9d424fe4051d00e157a2
--- a/mbed-os.lib Tue Sep 03 14:01:54 2019 +0100 +++ b/mbed-os.lib Wed Sep 11 16:08:09 2019 +0000 @@ -1,1 +1,1 @@ -https://github.com/ARMmbed/mbed-os/#0063e5de32fc575f061244c96ac60c41c07bd2e6 +https://github.com/lrusinowicz/mbed-os.git/#729eb7df4d993ea31c13bf3c6e8c187f36a36266
--- a/mbed_app.json Tue Sep 03 14:01:54 2019 +0100
+++ b/mbed_app.json Wed Sep 11 16:08:09 2019 +0000
@@ -1,7 +1,7 @@
{
"config": {
"lora-radio": {
- "help": "Which radio to use (options: SX126X, SX1272, SX1276) -- See config/ dir for example configs",
+ "help": "Which radio to use (options: SX1272,SX1276)",
"value": "SX1276"
},
"main_stack_size": { "value": 4096 },
@@ -32,10 +32,11 @@
"platform.default-serial-baud-rate": 115200,
"lora.over-the-air-activation": true,
"lora.duty-cycle-on": true,
+ "lora.automatic-uplink-message": true,
"lora.phy": "EU868",
"lora.device-eui": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }",
"lora.application-eui": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }",
- "lora.application-key": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }"
+ "lora.application-key": "{ 0x47, 0x20, 0x68, 0xea, 0xf7, 0xd4, 0xa4, 0x3e, 0xbf, 0x13, 0xc9, 0xb2, 0xdf, 0x98, 0x91, 0x61 }"
},
"K64F": {
@@ -258,8 +259,29 @@
"lora-ant-switch": "NC",
"lora-pwr-amp-ctl": "NC",
"lora-tcxo": "NC"
+ },
+
+ "FUTURE_SEQUANA": {
+ "lora-radio": "SX1272",
+ "lora-spi-mosi": "SPI_MOSI",
+ "lora-spi-miso": "SPI_MISO",
+ "lora-spi-sclk": "SPI_CLK",
+ "lora-cs": "D10",
+ "lora-reset": "A0",
+ "lora-dio0": "D2",
+ "lora-dio1": "D3",
+ "lora-dio2": "D4",
+ "lora-dio3": "D5",
+ "lora-dio4": "NC",
+ "lora-dio5": "NC",
+ "lora-rf-switch-ctl1": "NC",
+ "lora-rf-switch-ctl2": "NC",
+ "lora-txctl": "NC",
+ "lora-rxctl": "NC",
+ "lora-ant-switch": "NC",
+ "lora-pwr-amp-ctl": "NC",
+ "lora-tcxo": "NC"
}
},
- "macros": ["MBEDTLS_USER_CONFIG_FILE=\"mbedtls_lora_config.h\""]
+ "macros": ["MBEDTLS_USER_CONFIG_FILE=\"mbedtls_lora_config.h\"", "FEA_TRACE_SUPPORT"]
}
-