Revision 7:72e307987683, committed 2018-07-24

Comitter:

cgoyette

Date:

Tue Jul 24 16:53:15 2018 +0000

Parent:

6:4c38bb36099c

Commit message:

removed debug messages.

Changed in this revision

--- a/Adafruit_ADS1015.cpp	Tue Jul 17 16:17:50 2018 +0000
+++ b/Adafruit_ADS1015.cpp	Tue Jul 24 16:53:15 2018 +0000
@@ -32,20 +32,20 @@
 /**************************************************************************/
 void Adafruit_ADS1015::writeRegister(uint8_t i2cAddress, uint8_t reg, uint16_t value)
 {
-    printf("ADC-wr1\r\n");
+    //printf("ADC-wr1\r\n");
     char cmd[3];
     cmd[0] = (char)reg;
-    printf("ADC-wr cmd0=%i\r\n", cmd[0]);
-    printf("ADC-wr2\r\n");
+    //printf("ADC-wr cmd0=%i\r\n", cmd[0]);
+    //printf("ADC-wr2\r\n");
     cmd[1] = (char)(value>>8);
-    printf("ADC-wr cmd1=%i\r\n", cmd[1]);
-    printf("ADC-wr3\r\n");
+    //printf("ADC-wr cmd1=%i\r\n", cmd[1]);
+    //printf("ADC-wr3\r\n");
     cmd[2] = (char)(value & 0xFF);
-    printf("ADC-wr cmd2=%i\r\n", cmd[2]);
-    printf("ADC-wr4\r\n");
-
+    //printf("ADC-wr cmd2=%i\r\n", cmd[2]);
+    //printf("ADC-wr4\r\n");
+    //printf("i2c-Write return = %i\r\n", m_i2c->write(i2cAddress, cmd, 3));
     m_i2c->write(i2cAddress, cmd, 3);
-    printf("ADC-wr5\r\n");
+    //printf("ADC-wr5\r\n");
 }
 
 /**************************************************************************/
@@ -55,15 +55,15 @@
 /**************************************************************************/
 uint16_t Adafruit_ADS1015::readRegister(uint8_t i2cAddress, uint8_t reg)
 {
-    printf("ADC-RR1\r\n");
+    //printf("ADC-RR1\r\n");
     char data[2];
-    printf("ADC-RR2\r\n");
+    //printf("ADC-RR2\r\n");
     data[0] = reg; // temporary use this to send address to conversion register
-    printf("ADC-RR3\r\n");
+    //printf("ADC-RR3\r\n");
     m_i2c->write(i2cAddress, data, 1);
-    printf("ADC-RR4\r\n");
+    //printf("ADC-RR4\r\n");
     m_i2c->read(i2cAddress, data, 2);
-    printf("ADC-RR5\r\n");
+    //printf("ADC-RR5\r\n");
     return (data[0] << 8 | data [1]);
 }
 
@@ -91,7 +91,7 @@
 {
     // shift 7 bit address 1 left: read expects 8 bit address, see mbed's I2C.h
     m_i2cAddress = i2cAddress << 1;
-    printf("12c-address=%i\r\n", m_i2cAddress);
+    //printf("12c-address=%i\r\n", m_i2cAddress);
     m_conversionDelay = ADS1115_CONVERSIONDELAY;
     m_bitShift = 0;
     m_gain = GAIN_TWOTHIRDS; /* +/- 6.144V range (limited to VDD +0.3V max!) */
@@ -125,13 +125,13 @@
 /**************************************************************************/
 uint16_t Adafruit_ADS1015::readADC_SingleEnded(uint8_t channel)
 {
-    printf("ADC1\r\n");
-    printf("channel = %i\r\n", channel);
+    //printf("ADC1\r\n");
+    //printf("channel = %i\r\n", channel);
     if (channel > 3) {
-        printf("ADC2\r\n");
+        //printf("ADC2\r\n");
         return 0;
     }
-    printf("ADC3\r\n");
+    //printf("ADC3\r\n");
     // Start with default values
     uint16_t config = ADS1015_REG_CONFIG_CQUE_NONE    | // Disable the comparator (default val)
                       ADS1015_REG_CONFIG_CLAT_NONLAT  | // Non-latching (default val)
@@ -141,48 +141,48 @@
                       ADS1015_REG_CONFIG_MODE_SINGLE;   // Single-shot mode (default)
 
     // Set PGA/voltage range
-    printf("ADC4\r\n");
+    //printf("ADC4\r\n");
     config |= m_gain;
-    printf("ADC5\r\n");
+    //printf("ADC5\r\n");
     // Set single-ended input channel
     switch (channel) {
         case (0):
-            printf("ADC6\r\n");
+            //printf("ADC6\r\n");
             config |= ADS1015_REG_CONFIG_MUX_SINGLE_0;
-            printf("ADC7\r\n");
+            //printf("ADC7\r\n");
             break;
         case (1):
-            printf("ADC8\r\n");
+            //printf("ADC8\r\n");
             config |= ADS1015_REG_CONFIG_MUX_SINGLE_1;
-            printf("ADC9\r\n");
+            //printf("ADC9\r\n");
             break;
         case (2):
-            printf("ADC10\r\n");
+            //printf("ADC10\r\n");
             config |= ADS1015_REG_CONFIG_MUX_SINGLE_2;
-            printf("ADC11\r\n");
+            //printf("ADC11\r\n");
             break;
         case (3):
-            printf("ADC12\r\n");
+            //printf("ADC12\r\n");
             config |= ADS1015_REG_CONFIG_MUX_SINGLE_3;
-            printf("ADC13\r\n");
+            //printf("ADC13\r\n");
             break;
     }
 
     // Set 'start single-conversion' bit
-    printf("ADC14\r\n");
+    //printf("ADC14\r\n");
     config |= ADS1015_REG_CONFIG_OS_SINGLE;
 
     // Write config register to the ADC
-    printf("ADC15\r\n");
+    //printf("ADC15\r\n");
     writeRegister(m_i2cAddress, ADS1015_REG_POINTER_CONFIG, config);
 
     // Wait for the conversion to complete
-    printf("ADC16\r\n");
+    //printf("ADC16\r\n");
     wait_ms(m_conversionDelay);
 
     // Read the conversion results
     // Shift 12-bit results right 4 bits for the ADS1015
-    printf("ADC17\r\n");
+    //printf("ADC17\r\n");
     return readRegister(m_i2cAddress, ADS1015_REG_POINTER_CONVERT) >> m_bitShift;
 }