Revision 0:447a1bbce2ca, committed 2014-08-23

Comitter:

dan_ackme

Date:

Sat Aug 23 13:08:08 2014 +0000

Child:

1:df55971a70cb

Commit message:

Initial check-in

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Wiconnect.lib	Sat Aug 23 13:08:08 2014 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/teams/ACKme/code/Wiconnect/#7b67c3f94de9

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Sat Aug 23 13:08:08 2014 +0000
@@ -0,0 +1,65 @@
+
+#include "Wiconnect.h"
+#include "target_config.h"
+
+#define NETWORK_SSID "<YOUR NETWORK SSID HERE>"
+#define NETWORK_PASSWORD "<YOUR NETWORK PASSWORD HERE>"
+
+#define ECHO_SERVER_ADDRESS  "<YOUR LOCAL IP ADDRESS HERE>"
+#define ECHO_SERVER_PORT 7
+
+
+static Serial consoleSerial(STDIO_UART_TX, STDIO_UART_RX);
+static char buf[256];
+
+
+int main()
+{
+    WiconnectResult result;
+    SerialConfig serialConfig(WICONNECT_RX_PIN, WICONNECT_TX_PIN, 256);
+    Wiconnect wiconnect(serialConfig, 256, NULL, WICONNECT_RESET_PIN);
+
+    consoleSerial.baud(115200);
+
+    if(WICONNECT_FAILED(result, wiconnect.init(true)))
+    {
+        printf("Failed to initialize Wiconnect: %s\r\n", Wiconnect::getWiconnectResultStr(result));
+        for(;;);
+    }
+    else if(WICONNECT_FAILED(result, wiconnect.join(NETWORK_SSID, NETWORK_PASSWORD)))
+    {
+        printf("Failed to join network: %s\r\n", Wiconnect::getWiconnectResultStr(result));
+        for(;;);
+    }
+
+    printf("IP Address is %s\n", wiconnect.getIpAddress());
+
+    TCPSocketConnection socket;
+    while (socket.connect(ECHO_SERVER_ADDRESS, ECHO_SERVER_PORT) < 0)
+    {
+        printf("Unable to connect to (%s) on port (%d)\r\n", ECHO_SERVER_ADDRESS, ECHO_SERVER_PORT);
+        wait(1);
+    }
+
+    char hello[] = "Hello World\n";
+    if(socket.send_all(hello, sizeof(hello) - 1) == -1)
+    {
+        printf("Failed to send data\r\n");
+        for(;;);
+    }
+
+    int n = socket.receive(buf, 256);
+    if(n == -1)
+    {
+        printf("Failed to receive data\r\n");
+        for(;;);
+    }
+    buf[n] = '\0';
+    printf("%s", buf);
+
+    socket.close();
+    wiconnect.deinit();
+
+    printf("Finished!");
+    while(true) {}
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Sat Aug 23 13:08:08 2014 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/9327015d4013
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/target_config.h	Sat Aug 23 13:08:08 2014 +0000
@@ -0,0 +1,93 @@
+/**
+ * ACKme WiConnect Host Library is licensed under the BSD licence: 
+ * 
+ * Copyright (c)2014 ACKme Networks.
+ * All rights reserved. 
+ * 
+ * Redistribution and use in source and binary forms, with or without modification, 
+ * are permitted provided that the following conditions are met: 
+ * 
+ * 1. Redistributions of source code must retain the above copyright notice, 
+ * this list of conditions and the following disclaimer. 
+ * 2. Redistributions in binary form must reproduce the above copyright notice, 
+ * this list of conditions and the following disclaimer in the documentation 
+ * and/or other materials provided with the distribution. 
+ * 3. The name of the author may not be used to endorse or promote products 
+ * derived from this software without specific prior written permission. 
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS AND ANY EXPRESS OR IMPLIED 
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
+ * OF SUCH DAMAGE.
+ */
+#pragma once
+
+
+// The BAUD rate your PC/MAC/Linux terminal uses with the eval board
+#define CONSOLE_BAUD 115200
+
+
+// Uncomment this to enable WiConnect serial interface hardware flow control
+// NOTE: your platform must support the serial flow control api functions
+//#define ENABLE_FLOW_CONTROL
+
+
+#define WICONNECT_INTERNAL_BUFFER_SIZE (4*1024)
+#define WICONNECT_SERIAL_RX_BUFFER_SIZE (4*1024)
+
+#define DEFAULT_CMD_GETCHAR_TIMEOUT 250
+#define DEFAULT_COMMAND_LINE_LENGTH_MAX 128
+#define DEFAULT_COMMAND_MAX_HISTORY 16
+#define DEFAULT_CMD_PROMPT_STR "> "
+#define DEFAULT_COMMAND_MAX_ARGV 16
+
+#define TEST_NONBLOCKING_API false
+#define TEST_BUFFER_LENGTH 4*1024
+
+
+//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+// Seabass Target Configuration
+#ifdef TARGET_SEABASS
+
+#define WICONNECT_TX_PIN PA_9
+#define WICONNECT_RX_PIN PA_10
+#define WICONNECT_RESET_PIN PB_0
+#define WICONNECT_WAKE_PIN NC
+
+#ifdef ENABLE_FLOW_CONTROL
+#define WICONNECT_CTS_PIN PA_11
+#define WICONNECT_RTS_PIN PA_12
+#else
+#define WICONNECT_CTS_PIN NC
+#define WICONNECT_RTS_PIN NC
+#endif
+
+#endif
+
+
+//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+// Nucleo F401RE Target Configuration
+#ifdef TARGET_NUCLEO_F401RE
+
+#define WICONNECT_TX_PIN PA_9
+#define WICONNECT_RX_PIN PA_10
+#define WICONNECT_RESET_PIN PC_7
+#define WICONNECT_WAKE_PIN NC
+
+#ifdef ENABLE_FLOW_CONTROL
+#define WICONNECT_CTS_PIN PA_11
+#define WICONNECT_RTS_PIN PA_12
+#else
+#define WICONNECT_CTS_PIN NC
+#define WICONNECT_RTS_PIN NC
+#endif
+
+#endif
+
+