Important changes to forums and questions
All forums and questions are now archived. To start a new conversation or read the latest updates go to forums.mbed.com.
10 years, 12 months ago.
Differ b/w the VLH4,VFM4,VFT4 and VLK4 version of KL25z
Is it just the type of SMT Package differentiation or its more than that? I'm asking this because I need to programme this as I programme my FRDM KL25z board
1 Answer
10 years, 10 months ago.
Hello,
please check the KL25 datasheet, chapter 1:
http://www.freescale.com/files/32bit/doc/data_sheet/KL25P80M48SF0.pdf
Copied from there for reference:
1
Ordering parts
1.1
Determining valid orderable parts
Valid orderable part numbers are provided on the web. To determine the orderable part
numbers for this device, go to
www.freescale.com
and perform a part number search for
the following device numbers: PKL25 and MKL25
2
Part identification
2.1
Description
Part numbers for the chip have fields that identify the specific part. You can use the
values of these fields to determine the specific part you have received.
2.2
Format
Part numbers for this device have the following format:
Q KL A FFF R T PP CC N
2.3
Fields
This table lists the possible values for each field in the part number (not all combinations
are valid):
Field
Description
Values
Q
Qualification status
• M = Fully qualified, general market flow
• P = Prequalification
KL
Kinetis family
• KL25
A
Key attribute
• Z = Cortex-M0+
FFF
Program flash memory size
• 32 = 32 KB
• 64 = 64 KB
• 128 = 128 KB
• 256 = 256 KB
Table continues on the next page...
Ordering parts
KL25 Sub-Family Data Sheet Data Sheet, Rev. 3, 9/19/2012.
Freescale Semiconductor, Inc.
3
Field
Description
Values
R
Silicon revision
• (Blank) = Main
• A = Revision after main
T
Temperature range (°C)
• V = –40 to 105
PP
Package identifier
• FM = 32 QFN (5 mm x 5 mm)
• FT = 48 QFN (7 mm x 7 mm)
• LH = 64 LQFP (10 mm x 10 mm)
• LK = 80 LQFP (12 mm x 12 mm)
CC
Maximum CPU frequency (MHz)
• 4 = 48 MHz
N
Packaging type
• R = Tape and reel
• (Blank) = Trays
Regards, c0170